If memory serves a 93 Disco does not have the fusible link box-it was fitted later:D

Hi Munster All very clear now and it all makes sense and what you say is kina what I thought. From memory I think the short adjuster is on the passenger side on mine.I will check when I get home and confirm Cheers Paul:)

Thanks Nice See what you mean as there is an adjuster tube on the track rod to set the steering. So I assume you rotate the drag link rod to adjust it or am I talking total nonsense:eek:

Cheers Steve I think I was a little vague in my post When you did your track rod is one a left hand thread and one a right hand thread? I assume the drag link is two right hand thread Cheers again Paul:D

Fellow Landrovians Can someone confirm that the LH track ball joint goes on the steering drop arm and the 3 RH ones go on the track rod and drag link Also on the steering box I can see a ball joint of some kind above the splines.Is that normal or is the box stuffed Cheers Paul:confused:

That sounds logical How about the A ball joint and is there just one of them in the suspension system Cheers Paul:)

Cheers Sorry I meant to say steering and suspension bits:D

Hi all I am about to order some bits I think I need.Steering damper,track rod ends.bushing kit.Any other suspension bits any one recommends Thanks in advance Paul :)

Cheers-worth a try:D

Hi all Anyone know where to get/part no for the push in fastners that hole the foot well card board trim things in :)

I think it the temp sensor for the EGR system

I got seals from Britcar-I think they do the whole unit as well:)

Silly question but better safe than sorry I have 2 fobs one works and one doesent.Can I just sync the second one without messing up the first or will I sync both at the same time?? Better I have one working than none :)

Thanks for the replies guys I have the new seals anyway just in case:)

PS I think one is called upper and one lower but diagram doesent show where they go :violin:

Hi again all I have bought the 2 rubber seals before I take the sedimenter apartOne is slightly larger than the other.Where do they go so I dont get a shock when I take it off:eek: Cheers Paul

Hi Biglad Mine hasent got the immobiliser as it only has the 1 button fob-think that started in 1996. Switch is probably one of the LR 'options' in other models :D

Is this the single button fob method :D

Cheers Bobbler As mine is a manual I can safely ignore it then :)

Hi In my case I fitted a Kenwood unit and snipped of the pink plug with the red and black wires.I then soldered on a phono/RCA plug with the red to the centre pin and black to the ground on the phono.Worked fine Just check that your radio puts 12V on the connector that tells the subwoofer to...