I've just sold a handheld on eBay :(

Started rubbing down for spraying but now no longer needed. In excellent condition and cost well over £500 new. £200 and buyer collects. If you want a white one it will polish up. Located in Leeds.

Towbar only - It has the electrics but the plug has been cut off by some numpty in the breakers yard. £25 and buyer must collect from Leeds.

I did it by holding the bolt inside with mole grips to stop it spinning!

Any idea of what time we'll be finished on Sunday?

80p for 90-110 & Defender Clutch Slave Cylinder at www.rimmerbros.co.uk

It's real easy and there is some good info out but Landy Anorak did it the hard way by locating the spring ends first. Locate the spring in the u-bush first and it's a piece of **** and all do from the footwell. This is my invoice for part numbers, price and web address. 1 x EDP7510L...

I've just done the spring conversion to my 90 TD5 and I must say it feels much lighter than the long single spring. It took ages to fit as most of the fitting instructions on the web are wrong or over complicated. Just remove the old spring. Fit the bushes and then this is where it's wrong -...

Is an 04. It's a genuine LR tow bar but the tie-bars are for a 110 :( I was told it would fit :(

On eBay Land Rover Defender 110 | eBay

I've just fitted a towbar on my TD5 90 but the towbar is from a 110 so the tiebars don't fit. They are there for a reason but is it okay to tow without them. Normally I'll be towing a bike trailer with about 200Kgs on but I've been asked to move a 1.5ton tractor. On a side note, can you buy...

The aircon looks like it's just a superficial addon. It's all held on with 5 screws and underneath the heating is unmodified apart from the footwell vents.

It's an 04 TD5. I was hoping the cable controls were the same!

Ha Ha. I thought I was the only one on this thread :) It's my 4 Defender and I've been working up to a 'nice' one for years. Finally got a mint XS but it's nearly 10 years old!

Hi, Anyone got any for a 90 TD5. I bought a 110 tow bar and was told it would fit but as the tank is in the way on a 90 the strengthening struts don't fit.

I think I have solved what is happening when the lower vents. The ducting for the a/c contains extended foot vents which match up with the holes in the lower dash where the normal vents would normally go. The a/c ducting vent has a foam edge to match up to these holes but the vinyl that covers...

Anyone :confused: I loosened the aircon ducting on the passenger side last night and where I'd expect the foot vent hole to be on a no a/c model is cover over with vinyl. Were should warm air come out off on a TD5 XS with a/c. Pretty please :D

The cable seems to be working as air goes to the windscreen and stops when set to the lower position. I can hear the hot air going somewhere when in the lower foot well position on the control but I can't feel it anywhere inside or in the engine bay. Where is this hot air going and is it...

I need to check my air distribution cable and I've found a manual with instructions but it doesn't mention air con. :eek: Does this make a difference and is it an easy job. I see the lower dash has to come out. Land Rover Workshop Manuals > 300Tdi Defender > HEATING AND VENTILATION >...

Nope. When I bought it the mystery item was inthe chubby box with the locking wheel nut key.