Cheers, will do got h/d rear bumper been in my garage a couple of years, needs re-coating or painting and snorkel to fit won that a couple months ago. Wheels had to change colour, done with silver and not the brake dust won't show. lol

Cheers people. Must have been a long read, sorry about the spelling / grammer its not my strong point.

I used normal rivets in the top 2 fixings and s/s nuts and bolts in the lower 2, need to different lengths as one goes though the inner and outer skins of the door and other only the other skin. I also had to move my number plate down.

Wheels and tyres on Amazing how the style 3's look bigger than the old wheels, Glad I didn't go to 17" D3 wheels.

I wasn't getting a spare to sort the wheel's only got as far as priming the wheels but did finish the centre caps for colour check. The wheels have now gone to be done the same. I have also just complete a full service (minis pollen filter) on the D2 included All oils, engine, gearbox...

I hope all these updates are keep you busy and maybe filling some inboxes with notifications lol. Was going to finish but got a big ending lol# passed MOT this week but got some jobs to do that I've been meaning to get to but time just fly by. Its not the small jobs either. [119.gif] But to...

Little mod I liked the idea of when I saw everyone else do it with the alarm sensor, but I'd already used that spot and needed to volt meters one for each battery. So this is what I did. Perspex was cut a few weeks ago (but did need a trim) Wiring I put in place last week, then the meters came...

Well had a whistle after fitting the LED thought it was the now unused holes in the old light bar, so blocked these up with grommets glued in place but still there, then thought it must be the led bar itself, so blocked the ends with card, and it was gone. So ordered some 5mm Perspex and Friday...

June 2015 To Steve, Happy Birthday, From Steve. . I've took a live feed from my aux fuse box in the engine bay to the relays, mounted on my split charge relay bracket. (see planned ahead) Don't worry it was shrink wrapped and put in conduit, But it was such a good solder I took the picture...

When I got home from my 3 night break in the tin tent, I have some silicone blanking caps on my mat. I as I was fed up of the EGR blanks that kept perishing. and decided to strip the rest of it out completely.

She getting there now, and less bits in the garage too. Seats just right I'd say.

My neighbours gave me this, told me he wasn't having another land rover and that I'll be needing this lol. Hard to tell where its going but when it starts leaking out everywhere I thought that'll do. So that's both sills done inside and out, Sliders on next.

As promised started on the sliders today. Here's the pictures. Sill covers off and lots of dirt found. I then offered up the sliders and drilled all the mounting holes, before any of the cleaning up and prep was done, so the swarf was blown out and holes will be all painted. After a lot of...

D2 is running well, so fitted some parts I've had sitting about, a bit late for this year or early for next winter but made the loom for D3 heated washer jets yesterday and fitted it all today (lunch hour jobs at work) Next mod hopefully rock / tree sliders :tup:

All back together, including a recon injector in number 1. Nice looking drive this afternoon at phil's.

Its now back together just with injectors left to put in, oil water etc. This is what a new piston looks like. Nice Clean oil pump assb. Year old pump that decided to leak once, so as I had replacement in stock I fitted it as it was an easy job with the head off and the rotory filter drain...

Well this weekends work has ended not as expected. late Saturday morning I started on the missfire hunt, again. multi meter out checking no resistance between the injector loom and the red plug of the ecu, All ok. Then injectors out to check compression and move injector number 1 into a...

Well back to todays job in hand Oily as always All clean ready for new loom

I also copied bennehBoy's air box mod. I didn't know about this bit in the intake pipe of the air box, I do now, and do have a spare air box in I want to go back. Before After Also spotted I needed a new dump valve, well to the garage for my spare air box.

Well its been running rough this last week and I read the fault codes at work and it had open circuits logged for all 5 injectors :eek: Cleared faults and decided to try my genuine injector loom. So today was the day I also checked and cleaned all the engine's sensor's. ECU first still nice...