2004 HSE 120k Hello to all Merry Xmas and Happy New Year to All, may 2021 brings us piece and normality that we so much need. My friends I'm here to expose some of my car problems, that some of you might have had it and solve it. And now I ask for your opinions. I guess my engine is ok now no...

Many thanks that will perfectly..I will keep you guys posted I have send you a preview....tell me what you guys think

Hello. I have the wiring . I was looking to know about a place were it go inside the car. I have seen a spot close to were the sensor of the bonnet is there is a entrance there. SO far is the best i have seen

2004 TD4 HSE 120k I want to connect some spot lights but I need a switch inside. Anyone knows where can I pass the wires inside any place for the effect of rubber Gromit? Many thanks

HELLO TO ALL Ok yesterday I have replaced the injectors (used ones from a braking LR) Out back the EGR and the Breeder filter. Start the car smokeeee. went to a drive up the road full of smoke. came back and let it run for a wile. I start it to notice the strange burn smell was gone. Went up...

That's a very good question Jay.... Well I asked and the seller told me its 1 set of 4 :)

Thank You much better than the deal i had...

Hello to All. Does anyone know the dimensions of the td4 cooper washers. I bought form the dealer 1 and its outer 1,5mm and inner 7mm. I assume this are correct. Can any one tell me where I can buy washers because 6 pounds one is ridiculous Many Thanks

FIXED!!!! I used a wall anchor and glued one of trim pieces (right) I also reinforced the other one with some hot glue...ITS BACK IN THE CAR Many Thanks My Friends

Sorry the photos from the breather filter were missing. Another thing I just did was to test them with a multimeter. I se to ohms 200 And all of them gave me between 00.8 and 00.9 Shouldn't I get values between 160. and 180. ? ??? Shouldn't this give a check engine light if the injectors were...

Hello So today was work day. I started the car let it run for 5 min then rev it to 2000 …smoke I guess not as much. But yesterday it was running with new 15 liters of diesel with redex injector cleaner. In some of the times I rev the engine there was no smoke or almost none For a start I removed...

Hello I have been killing my head how to fix this. Looks easy but its not because the pivot that goes in side the door moves so it can be a just pin... Did anybody had this broken and fix it? Many Thanks

If it does this .....its a problem. Maybe is just me, but i need to find the solution. I can just accept the in time my car starts to smoke and no one finds why.

SO should we blame the breather filter or the oil separator from BMW?

So its starts with no warning and no one knows what cause this?? I believe it can be injectors because the car was stop for a wile and with low fuel. it might clogged the injector. I don't understand is why smoke....I can understand if misfires because its clogged. But the smoke???!!! The truth...

Not has much...but when you rev it +/- 2000 rpm ....

But enough to cause the smoke.....

Looks like the problem with the misfire and smoke are injectors 1 and 3

I already bought the filter so I will put it back. A mechanic also told me that this smoke is caused by dirty injectors. So he told me to put clean fuel (shell is possible) and go for a drive of 30 miles or so.... The fact is it started so suddenly even the last time I was up down the road every...

SO what you mean is...about the small hole just put the cover back and its fixed... what about the smoke...is just a fault in design so I should ignore it and drive it like that? Did i miss your point? Do i revert to the old filter system and install the egr back again? I honestly dot know what...