Hi Folks Had a job on the weekend and got a lend of a 12' foot ifor with a 1 ton digger. Hitched up and went to drive off in high box and man alive did the disco struggle to take off, it moaned and groaned. Threw it into low box and second and no problem. I wouldn't have thought this was a...

just had a look at the kent from turner good price, would love it but just done clutch and DMF on disco 2 and I'm broke

Didn't know that must give them a ring. Yep entered in part number and up it popped then had a bearmach water mark on photo so just assumed.

Lads, I probably know the answer to this and the replies but I just have to ask it for my own sake, I need a new cam for my 4.6, its in a challenge truck that's used for pay and play days so I'm not looking for an 1st in Croatia or Dresden. I had a look at the Kent cams and there coming...

Bled the system last night and got a pedal, but still couldn't get gear when engine running, feels as if the master cylinder isn't strong enough to push the clutch in fully, ordered a new master cylinder

lovely looks like a master cylinder is on the cards,as I have a new pipe and slave cylinder

Ah thought it was effecting it as it wouldn't even gravity bleed.

Had a look on microcat and no loop da loop

Is that curly seriously meant to be there. Have new pushrod for slave cylinder

bought a new disco recently and clutch pedal was pretty hard, my left leg is like Schwarzenegger's. replaced clutch and dmf and read that replacing the slave cylinder would help with a stiff clutch. Tried tonight to bleed it, good old fashioned way with fluid in a bottle and someone pumping...

Cool. Thanks James

Replacing the Clutch and DMF on my td5. What a pain in the ass it is removing the gearbox. Fecking nightmare. Plus I stripped the plug off the CPS as I couldn't see it with all the pipes and wires that side of engine. Off the road now till next weekend. I had to take the selector off to give me...

What do you put in the dishwasher for detergent.

That was my next question. Learnt that with a defender. Going to stay standard ride height.

Lol landrover. Vehicle owner apprenticeship scheme on the go.

Guys, Just looking at the front of my disco and its slightly down on one side. Measured it and there's a bit in the difference. I was thinking the springs are 10 years old now and probable tired at this stage. Looked up replacement springs but can only find Britpart. Now I know how infamous...

I'll give that a try, will ask her indoors to hit it with the hammer lol

Cool, will give that a go. Probably covered in oil

Hi Folks, Tried a forum search but nothing coming up. Basically, hoped into my disco last night, turned the key to start and nothing. Lights didn't dim on the dash so didn't suspect the battery. Tried a couple of times to start it and it finally turned as if nothing was wrong. Drove a...

Was hoping just a swap. Didn't pay much attention to layout. Cool. I'll skip it so.