the egr seems to be clean

could it be something like a breather blocked ?

what is causing this to happen?

i have a leak from the small hole in the EGR valve what can be the cause of this? oil seams to leak onto the engine cover thanks

ive got a leak above the steering box it seems to be coming from the side of the egr (there is a small hole ) any ideas would be helpful thanks

is it better to remove the rad and how long does the whole job take

hello i ve got a leak from the power steering , it seems to be dropping from the box (but that could be the lowest point) ive removed the 3 screws and cover in the wheel arch cleaned the area but still cant find where the keak is how difficult is it to strip down and change the seals what...

i bought a valve off e bay but only the part that fits behind the circlip it cost thirty pound i tried the rubbers and gaskets that didnt work but the valve is still working the job is difficult but i managed it ok

i would take the lock and key to a good locksmith i had the same problem and the RAC man removed them so i could get home then waited 9 months for a new one from landrover the locksmith fixed it in halfhour and charged £15 a bargain i thought

my window doesnt work what is the most common thing and if its the motor where is the best place to get it

how can i check the lock?

disco 2

still not working properly

yes ive lubricated the handle and it seems to be fine thanks for reply

i have changed the remote door lock numerous times the lock on the car now will only open when you pull the handle inside ( the child lock is not on ) i changed one last week and it operated ok for a day then the lock makes all the right noises and the little indicator lifts up but the door...

disco 2 my horn switch keeps on coming apart is there any cheap way of fixing this i do not want to pay serious money for the switch any suggestions ive looked at a couple of sites and£60 seems steep to me

any more ideas

off the rear cross member

2 on a 53 plate

the back door strap (the one that stops the door swinging right round)has broken off has left the stud level with the bracket this has come off and im worried that the wind will take the door the stud seems to be welded any suggestions would be a help