Thanks Brian, very useful information. I'm studying the RAVE manual at the moment looking at the circuit diagrams. Will have a go on the voltmeter later on and see what I get after work. What happens if I'm not showing any volts? Clearly there is a bigger issue in the loom?

Yes, I have also tried googling wiring diagrams but nothing seems to show anything of use..

Yep, both of those fuses are intact. My indicators work, my clock has a backlight but no numbers (probably the display gone) my alarm doesn't work and I don't have a fob, just a door key and an ignition key. Presumably there was an immobilizer issue in the past that a past owner has sorted in a...

Fellow DarrenHS3 turned up to work, always great to see how good condition his is kept! Truly lovely example. Makes mine look a mess Wired up my boost gauge lights finally, should look good in the dark! Used an idea that Foz had with the fuse box, mainly as mine has so many electrical issues...

So my new stereo doesn't seem to work. I've connected it to my Dad's land rover and it works on his so there is an issue with my wiring somewhere... Fuses are all okay, infact the whole cars fuses are okay. Long story short my interior light and stereo do not work for some reason, don't know if...

Funny you should say that, she wants a very specific and expensive one for Christmas!! :mad: :D Wouldn't want that covered in mud haha

Oh I'll be fine in the winter, it's the misses will be in my ear that's all! haha It's just weird that this happened directly after the welding has been done. The fan used to work beforehand.

Thanks discool, I will have a look. Going to steal a few relays from my Dad's discovery to try and pinpoint the problem. Can't seem to find anything which says what relay is what.

Everywhere I asked everyone makes a joke out of it :( looks like it will be a cold winter :D

Got heat homing out the vents, just the lights on the centre console for the heater are not working and nor is the blower fan. I've recently cut out and welded in new inner arches and upper footwells, no cables are cut through, I made sure of that!! lol I know that on the LHS footwell there...

Thought I'd pick it up so I could drive it to work, just want to put a bit of mileage as I haven't used it too much recently. Noticed a few problems.. Headlights were dim as hell, found the issue quickly enough though. Was a bad ground on the wing where I cut the old one out. Quick fix, found...

Cleaned out a space so I can work in the dry, as the brakes didn't arrive in time I thought I would get the front end off for now so I can look over the bulkhead and get ready to do the footwells. Bonnet off easily enough, surely the rest can be this easy! Only 3 bolts were holding the...

So I got a nice delivery on Friday (haven't got round to fitting yet as awaiting bushes, apparently arriving today) I caved in and bought the castor and trailing arm set from Adrenaline 4x4. The castor arms are 6 degrees adjusted and the rear trailing arms are cranked so should all in all help...

Thanks matey, trying my best! Just get out there and buy a cheap welder bud, or even if you know someone get on and use it and practice. It's very easy to get the hang of. Now it's a skill that I have learned it gives me far more confidence in fixing cars myself. It's good fun too and seeing...

Ah nice! Not bad then, would need a fair amount more for mine if I ever were to do it. I'd probably do the chassis and everything as well lol

Ignore that last bit, I didn't see the other post on the other page! lol

Damn that's nice! Lovely finish to it, let's see how it holds up to the elements haha How did you spray it on? Just directly over the old paint once keyed up?

Fixed my suspension turret the other evening in the rain, hammered down as far as I could as well as clamping down on the turret to bring it as home as possible and then welded the nut in place. Don't think you'll be stripping the tread anytime soon nut!! lol Fixed the rattling sound I had which...

Parts look good, looks like you spent a small fortune there! Not sure if that was me, I don't remember if I have ever driven up around there but there are a few other disco's with the same colour as mine going about! I haven't had mine out in a few weeks because I've been doing the welding

I know, it's really good quality as well! The only downside is the new top layer that wont come off in places so it ruins it! Cool cheers I will have a look! If I do have to replace all 6 crossmembers it's going to cost a good 300 squids and then the floor so a cool 450 all in. Damn these 109's...