Thank you so much! Motivated by your response I have just removed the black plastic cover and as you said the wiring is all there. Just need to buy the plug in bar. Regards D

Hi all. We have just bought a Disco 3 2.7 TDV6 HSE on an 05 plate. I have been doing some research on towbars and have gotten a little confused. Can anyone tell me what I need to fit and whether the wiring is already in place? I read somewhere that the wiring is in one of the rear...

Will have to do some ringing around on Monday. I assume the Land Rover dealer would be the best place to start. D

Any idea how I go about this? Anyone near Preston who could do it? Thanks D

Any thoughts please?

So, looking for a replacement ECU for my disco and there appears to be a lot of talk about having to program it? Is this necessary? This whole issue started when the battery went flat - could it have wiped the software on the EEPROM, assuming it has one. Maybe the ECU itself is still OK...

Woo hoo!! Got it running!! Had to power up Pin 28 on the ECU to get a spark and directly power the fuel pump from the battery and it burst into life!! The ECU is getting power but it's not distributing any so looks like this is the culprit!! Just need to find one now! Can they be...

Not gonna happen. Just want to get the car I have going!! D

Still not managed to get my Disco to start. It's a 2.0 MPI and has no spark and no fuel being delivered. I had suspected it was an immobiliser problem but beginning suspect the ECU or a relay. Any tipson how to test the ECU? Thanks D

Oh, I see, sorry. Thanks. I will have another check. What a nightmare his is!! D

I don't think that is the right one as it appears to be for a v8 with a distributor. There is no white and yellow wire. Thanks anyway. D

Thanks for the link. The first thing to check, by the looks of things is whether there is power getting to PIN 11 on the ECM. Any IDE how to determine which is PIN 11? Cheers D

Whoops I meant ECU not CPU!! Halfords didn't have a manual so I will just have to see what I can find!! D

Just about to go out and see if I can work out why my Disco 1 won't start (1993 2.0 MPI). Hasn't been running for months as after the battery went dead the is no spark or fuel although the engine turns over. Think I will go to halfords and get a manual first. In the meantime any tips for...

Will give it a go.....nothing to lose!! D

It's only a garden ornament at the moment and if I can't get it going it will have to go!! Could I just take a live off the battery to the fuel pump and the coil or is it more sophisticated than that?? D

I believe it's factory fitted. It's a 1993 Disco 1 on an L plate, 2.0 MPI. D

He didn't look at it, he said that this models immobiliser doesn't cut the fuel and spark off, it stops the starter cranking the engine over. He couldn't help and didn't think coming out to look would be worth it. I have no idea whether he is right or not. The mechanic who looked at it...

Warped disks?

All, I have a 1993 Disco 2.0 MPI that has been off the road for months now due to the fact it won't start. It was fine until the battery went flat but after full recharge I am getting no spark and no fuel. I suspect it's immobiliser related but despite getting a new fob which is programmed to...