Yes mod egr unit:)

Hi been looking at a stainless egr on fleebay £40 compared to an aluminum one at £57 any advice on which one is best or disadvantages :confused:

Hi i have a 215/65/r16 goodyear wrangler hp still got bubbles on it was on my last freelander as spear £25 also have stainless cover with disc needs new lock would clean up well £20 i live near Hull East-Yorkshire :)

I don't even have one must of been an add on On later models:D

Thanks for the pic mine dose not have the small section on the left so i only need two pipe thank you

Yes will change soon as poss how do i know if mind has three pipes or two were is the small pipe don't seem to be able to see one anybody got pics thanks mine is a 2000 reg did they fit one

:)Thanks for the info i know i ask a lot of question but ha ho if it make the car run better its all worthwhile thank again guys for the help

Hi bit of advice i am going to change the egr valve for an all sport when found allow but for now i cleaned out the old one at the weekend and cleaned the pipe had a look under the bonnet today and noticed the pipe is oily on the outside again its not loose dose the oil bleed throw the pipe is...

:)Can any one tell me the torque setting of the manifold bolts please

Hi looking for help again have been reading the land rover book and it say do not push button from D to N and do not go from drive to neutral dose this mean when sat at traffic lights i have to move to park then back to drive bit confused with there wording :doh:

Thanks for the info as you know not had this one long so trying to make sure every thing is ok

I know it will have been asked many time but how do i drain system on my td4 to put antfreeze in thanks

Yes bargain and the other thing i noticed has a notch on the right lower side wonder if they have modified for different housing

Fitted new type crank case filter took me about an hour but i am a bit slow looked at egr while i had the pipe off not to bad sticky oil in it will change unit when founds allow

Hi did you sell your tyre thanks

The last freelander i had did that i drilled a hole in the middle of the Handel and used a coach bolt there is a hole already in the door you have to make sure the bolt does not catch the glass hope this helps cost about 40p instead of £100