Think you need to move next door very helpfull just emailed them , ps would you possibly know if my radio has the built in amplifier , ie as some leads say they have a sceptered unit mines only a gas discovery 2002

mines one of these tbh which isn't listers , buggar looks like I'll have to find out ISO wiring diagram to find speaker pairs and lives earths from the unit

Top man sirdread yes I do have steering controls , next issues mays tart a new topic vibration on acceleration from 1500/2600rpm feel it threw handbrake

mine just has this plug straight into the rear of the radio ,I'd cut the plug off but unsure which wires go we're tbh ,looked on eBay but nothing like what I need, ie from the plug showing into the standard type plugs

Hi dose anyone know if the do a aftermaft iso ( radio wireing harness for my facelift radio ..mines the one that has a square contector on the rear with round pins as im after fitting a aftermarket radio will upload a picture if anyone can help

as above , m and s lights flashing , I assumed xyz switch replaced the unit ,and fault still shows , I plugged the fault code reader in , showing these faults any idea guys(sorry for side pic) drives but d flashing wont select 1,2,3

thanks james ,

anyone here had issiuses starting there d3 after a flat battery or injector change reason is mine was only running on 5 clyinders with eccess whitey blue smoke , as it was left till I located new injectors ,, I jumped the battery as it was flat , it started very missy and steady just died ...

Only a quick one bought new oil and filter for the auto gearbox drexon2 along with nw filter .is the oil filler a hexgen nut just behind bellhouseing faceing towards back of gearbox as theres no dipstick

Never found the problem .so i replaced the ecu lom which cured the problem .i assumed a brokern wire or wires in loom .tbh .fingers crossed its great .only small thing ive notice smell of strobg feuling from exhust on idiol (maybe because old cat convertor was removed .) Starts runs well...

Right pal f13 has 12v .but pin21 off black plug shows a thin blue red strip .when switched igition on not showing earth just shows a single bleed .removed r9 engine relay pin1 not showing 12v

im totally with you on that ,,, brilliant ,,,only issiuses i didn't understand if everything was working while cranking on the engine wouldn't evern try to fire/start when cranking while the relay was manualy pressed , ie there was diesel smoke but no fireing , unless ecm is faulty ,, will...

its my own vechical not anyone elses , not had a weld crack yet, i weld more difficult items then this,I weld by trade , im happy with it , simple:D infuture ill not post , again simple ;)

right im roughly with u ,sure the wife will have one somewere ,,, saved diagram ill report which wire,pins doing what , little cold now and chuffing snowing to top things off

found a issiuse , ill try explain relay location (r9) black relay , I noticed first click of the key I heard a click the second ignition turno very faint click (sometimes wouldn't evern make a noise , I removed the relay tested the pins which show as they should apart from one pin only showing...

myself ,, thanks for the positive comment ,, ive built a fair amount of projects tbh , I call diy style with good results,,, ;)

your all welcome to your own thoughts tbh , personaly everything was cleaned out , and depending what you use , u don't end up with grinding dust and remains everywere tbh , area was cleaned, ground out and welded , basicly a 30mins to sort and saved a lot of time, effort locating another...

Not getting too far found that relay r9 isnt clicking when igitions turned on .yet bloody things showing power .if i hold relay in all lights appear on dash yet still wont start .looks like a auto election .tryed another relay with no luck

Why?

ie heres a rough idea from rave , u see the glow plug heater shows the heater glows then goes to a contector , but only shows opsite 12v feed into fusebox , im assuming the other feed is a switched live (possibly not showing on the heater relay?? ie as theres no power ,ie so it isn't...