Depends on which force you are processed under, Dorset normally took 4-8 weeks after the visit to issue the license. I know they are taking a few months at the moment for FAC renewals which has caused problems with a few members of our club where their licenses have expired !

They said that i was fitting it wrong and didnt want other people seeing it fitted like that but it wouldnt fit unless i trimmed the back corner off the metal on the raptor dash

I had to trim the back of the raptor dash slightly to get mine to fit. I did have pics of the process on my blog but raptor asked me to remove them !

Took the immobiliser apart, soldered a couple of wires into it and connected them to the maplin central locking kit, now got remote locking on a defender :) Also changed the horrible plastic bush on the end of the gear selector and i dont have to wave the gearstick around now when changing gear...

Fitted a new tent to the top which came in the post about 3 weeks early!

Finished fitting the new clutch and dual mass flywheel today, took 14 hours overall including making a custom frame to support the gearbox as the ground isnt level. Got it all back together again and found a new fuel drip above the starter so it looks like the pressure regulator i replaced a few...

Fitted a couple of strips of MUD Cargo Tracking in the back and a new Td5 Front Camshaft Oil Seal

Made a new ipod dock which is hidden behind a fake switch panel for the defender. ipod being removed from dock ipod dock closed with switch panel in place.

spent 3 hours trying to get rivnuts to stay in place on the seat brackets, ended up fitting a new plate below and bolting it in

i got £5 for a cat last time i took one to the scrap yard, used more fuel getting there than it was worth !

fitted a new heater matrix in the defender and now have heat inside :)

The switches came from MUD-UK - and the ligher sockets from Maplin Electronics at £6 each. I put more photos of the install on Brian Dorey.com | Fitting a Raptor Dash into a 1999 TD5 Defender

Finished installing a raptor dash into the defender

Fitted the dynamat hoodliner kit to the defender bonnet which turned up from ebay today.

How about a slightly larger dog turd :) YouTube - Land Rover Stuck On Snow Mound | What A Fool

its 17:50 in in iplayer from BBC iPlayer - Countryfile: 12/12/2010

spent 2 hours trying to get 3 spring clips off the thermostat on my td5 and then changed the coolant with nice new antifreeze and a new stat and it warms up a lot faster now.

You need the cam on the highest point when setting up the injectors. Did you change the rocker cover gasket as they sometimes leak at the back from the half moon shape bit or put some gasket goo round that bit to stop it.

Ive replaced the manifold gaskets and it still makes the noise. Finsihed changing them today now the rain has finally stopped and still no change!

you need to readjust the rockers when they go back in, before you undo the rocker shaft bolts, undo all the adjuster screws to release the pressure on the rocker shaft and undo the bolts evenly. I changed the washers on my td5 today and i made a slide hammer which gripped on both sides of the...