1. J

    p38 overheating/coolant issues

    From looking at Rave it may be worth taking the thermostat housing out of the bottom hose to see if you can then drain the header and rest of the system. As from looking at the diagram of the coolant system I can't see how you coudl drain the header tank from the radiator if the thermostat is...
  2. J

    p38 overheating/coolant issues

    There are coolant flow diagrams in Rave.
  3. J

    LPG Conversion

    You could try Hilton Auto gas between J1 of the M54 and J11 of the M6, haven't had a conversion doen there myself, but use them for fuel when visiting my folks.
  4. J

    P38 Thor V8 Radiator Hose Part Number

    Irish thanks for that.
  5. J

    P38 Thor V8 Radiator Hose Part Number

    Not tried to take the old one off yet and its a bit black and oily there so not easily.
  6. J

    P38 Thor V8 Radiator Hose Part Number

    Does anyone know the par number for the hose on a Thor V8 that goes from the water pump to the Thermostat housing ?
  7. J

    Clearing up the messy carpet after leaking matrix o rings

    When I had the same problem in mine, I used some Shout or 1001 type carpet cleaner to clean it intialy took a few applictaions, and then used a foaming capret cleaner a couple of times afer that and then left it to dry. Ideally I would have used a wet and dry type capret cleaning hover but I...
  8. J

    L322 4.4 V8 LPG Conversion costs & Reviews

    Interested in this thread as I will hopefully be looking to replace my LPG P38 next year maybe with an L322. For referance a mate had a BRC kit on his 4.4 X5 and it ran really well.
  9. J

    Throttle housing gasket

    You can do it in situ, just need to disconnect the air in let pipe and rocker cover breather to give better access.
  10. J

    P38 4.6 Lpg

    That sounds like the LEDs to indicate if you are on gas or petrol, assuming it is the same gauge as fitted to my Zavoli kit. My zavoli equipped 4.6 will saty on gas even when in traffic.
  11. J

    P38 Air Suspension Air Drier

    Guys thanks for the responses I had a gut feeling this might be the case but wasn't 100% sure.
  12. J

    P38 Air Suspension Air Drier

    A friend is having a few issues with his EAs on his 2001 P38, when I had a look I noticed that the drier for the Air Suspension has been monuted horiztonally due to a cone Air filter being fitted. Would this cause any long term problems given they are originally mounted vertically.
  13. J

    Power rating of P38 Boot Auxilliary socket

    Well guess it depends on the rtaing of those bulbs, in my case all the brake lights are 21w so the current draw has doubled. Looking on a few caravan forusm and magazines recently a few people have reported similar issues with bulb warning systems and multiple brake lights on their caravans.
  14. J

    Power rating of P38 Boot Auxilliary socket

    Oh yes there is when there are four brake lighst fitted to the Caravan and it upsets the BECM making it think the brake lights have failed. Two options fitted LED bulbs or a bypass relay. I went the bypass relay route as I coudln't find any E approved LED bulbs in my timescales.
  15. J

    Power rating of P38 Boot Auxilliary socket

    To be clear I have already wired in both the permant and switched live supplies to my 12s sockect via two runs of 2.5mm wire driect from the battery, and long term I will do the same for the road lighting relay. I was just looking for a short term solution for the bypass realy, as none of the...
  16. J

    Power rating of P38 Boot Auxilliary socket

    The wiring for the 12s socket is on the opposite side of the boot to the 12n wiring so if I was to use that I would just run a wire to the supply side of the BECM or the battery. Irish thanks for the suggestion I was just after a quick solution so I don't have to take lots of trim off to get a...
  17. J

    Power rating of P38 Boot Auxilliary socket

    So following on from my post about an issue with my towbar wiring I am in the middle of fitting a twoing bypass relay for the 12N socket. It needs a 15amp 12V supply, now I need the towbar for a holiday on Thursday, as a short term measure I was considering using the supply to the boot mounted...
  18. J

    P38 Brake Light Failure messages when towing.

    Derek thanks for that given they want to the trouble of detecting overlaods it would have been handy for them to code the appropriate message into the message centre. Now off to either find some LED bulbs before Thursday or more likely a bypass relay.
  19. J

    P38 Brake Light Failure messages when towing.

    Datetek yes I would agree you would have thought too little load rather than too much, but I guess ti depends on how some mad Brummie designed the circuity. I did think of removing the bulb, however the lights are individual Hella ones that don't apear to be very easy to get the bulb out, and...
  20. J

    P38 Brake Light Failure messages when towing.

    Have used my P38 to tow a caravan and my car trailer for the last couple of years and not had any porblems. However I have just swapped the caravan and now on the first time the brakes are applied I got a warning that both brake light bulbs have failed. Now the only difference on this caravan...