The only wires from the head unit direct to the sub are the red and black pair in a single plug (on the original unit) The supply must be picked up somewhere else in the loom. I just fitted mine as per previous discussion but so far have no output.

Or it might be the dreaded little round spring. Just done my rear door this morning. Back door drivers side does the same but its not much hassle to open it from drivers door.

Ok success but what a job! I think I preferred changine the head gasket! The instructions were vague and Mr Haynes not much help. I thought the spring was located in the outside catch assemble but it was in the bit on the latch. Anyway all done now and oily fingers.

Grrrrr just fixed door catch. Put the sub back on and connected up as above and it dont work! On the back of the stereo are 3 pairs of RCA (phono) sockets - aux in, front audio out, rear audio out. I connected up the rear audio out to a y connected phono lead which in turn I connected to the...

Sounds like brushes to me.

Thanks I have ordered the spring from the link you provided and apparently it comes with instructions. Its a pain having to olean over the back seat every time I need to open the back door so It will be good to get it done!

I broke all but 3 pins. The card was a bit tatty anyway so thinking of putting an ally checker plate on instead.

No worries, I reckon I can cut the hole for the sub. In fact if the sub is no good then I wont bother fitting it so I'll order one with holes for door catch and handle only then in the meantime if I manage to get the sub working then I can cut the hole myself. Send me a PM with the amount with...

I've been procrastinating over doing this job for a while now. Is it quite straightforward? good instructions etc? Can you come round and do mine too?

the thing is you need power to seperate h20 into its component parts. DC power and quite a lot. The extra power needed to generate will knock out any prospective savings overall. JMHO

with the holes foor door catch, handle and sub?

anyone got a checker plate rear door card for my disco? If this is the place we are asking fer stuff then thas what I'm after at the mo

A bit difficult since the title of this thread excludes Him.

I get a whining noise from my left when I go over 70.......

I've been to the tyre services 3 times and paid for puncture repairs. The last time they checked the wheel concerned and assured me there was nothing wrong with it. I still have to blow it up 8psi/wk. which is a pita to say the least. I might try that or the other stuff 'tyre weld' if I can get...

They all (300TDi) leak around the rocker covers, sunroofs, windscreen etc. I've had mine year now and as far as drive train is concerned, make sure all the gears work (lo - hi, diff lock) and trans sounds OK, check the cooling system is OK - no signs of head gasket failure - ie hi pressure in...

All seems OK done nearly 200 miles since the incident. I am a bit worried though. No sign of oil in water etc and no excess pressure. I did all the bolts that were loose up to a similar tightness (ie I used my forearm as a torque wrench) I did a search on here about torque settings and someone...

You could get your front seat passenger to sit on it, that way the pizza stays warm and so does the passengers bottom.

Got a P reg and the passenger seat dont work either....

Got back last night after driving 130 miles at 70mph and no sign of any smoke. havent looked under the bonnet yet.