Putting my front axle together today and I managed to snap one of the bolts whilst putting it back on I took it all off and its sheared just inside the axle casing. I have tried drilling holes, extractor kit, tap with a chisel, getting a mole grips on the thread on the otherside and just...

Its just a superseeded part number. The part is exactly the same! Compared to my AP Lockheed one it is identical. G

What are you talking about Daft? 1986 onwards (110) and HA onwards for 90s. It was fitted to my 1996 300tdi and has the 46mm pistons to ;) RTC5572 BRAKE CALIPER FRONT RH | Defender 1985>: Brake: Cylinder | shop | www.lrseries.com | L. R. Series G

I have a lightly used Front RH Caliper for sale. It is Britpart but has served me well for the past 12-15 months. Mine were originally leaking so I got this new to see me through and only now getting around to re-sealing my original. Boxed, very good condition £50 delivered/£40 collected...

Might help if we knew what gearbox it was (Tranny or main?) engine? Also where is the leak coming from? If its just the inspection cover I would drain it, take it off, clean it all up and re-fit with a bead of RTV. I wouldn't bother with evo stuff. The standard stuff (ATF or MTF94 depending on...

Trip Report finally finished Can be found here: West Africa Trip Report 2011 Sirocco Overland More photos on Facebook. G

Carnet is £150% of the vehicle value + around ~ $8000 import duty. Even though its only a temp import the Aussies want approx $8000 to cover it as well as the usual 150%! So depends what you have to what it will cost. Using an insurance company to cover it our 90 will likely come in around...

Bump. Take £10 for the mattress :D G

Do you want to share a 40ft container out of South Korea or Vladivostok (Siberia) Sept/Oct 2013? I will be shipping my 90+trailer to Aus from there. As has been said, its not economically viable to ship your landy for a few months to Aus but it has been done. Speak to Brendan at...

:hysterically_laughi

I put my money on a UJ. Probably front nearest gearbox :D G

BUMP - List edited to get rid of the sold stuff. G

A virtual pint, cheer and pat on the back :D G

Thanks to all, I made it into the calender and am therefore one of the 12 winners :D thank you for your support it is very much appreciated :) G

I cant believe I am reading this :( Never met the man but we did exchange a lot of emails and PM's. Genuinely a top chap. RIP G

cheers guys :D only 2.5hrs to go! G

Cheers Minty :D I asked on other forums and I have only had 1 response! :rolleyes: typical. this has rolled into 4 pages with everyone's help. G

Good man Wilts. just trying to catch those who didn't see it 1st, 2nd, 3rd and 4th time around! Fingers crossed. G

OK, I have done this to dead. but with 15 hours to go before voting ends Im just after one last push ;) It only takes a minute, thank you all for your patience once more :D G

Tom, I just looked at this again and what you have achieved is exceptional. You could teach the 'mags' a thing or two organising shows. I put a little plug on our Facebook page for you and may be there myself on Saturday, not sure yet. Good luck! G