I have just bought two Z clamps to fit my spare wheel on my bonnet but they di not come with bolts, I hear the bolts are 1/2" BSF x 3 1/2", I have been to the couple of Engineering workshops here in Shetland and they tell me I cannot get anything like that on the Island, Haha, I am not an...

Now this is a pic I could use as my avatar but it is not the one I was trying to use, the one I was trying to use is in my thread about "Is it ex mod" but if this one can be fitted I will be happy :)

I seem to be having problems even attaching pics to this thread, I have just had to message site management as there was an error that appearedHope this works anyway

Yes but the pic I have is too big and wont display as you can see where it has pushed my username to but pic is not visible. I thought Mods might have had the technology to do it for me as I am useless with comps

Ah, that would make sense as on my Series 2 the seal has been glued to the sill rail, I thought to put washers big enough to stop the screws pulling through the seal but it is supposed to be a strip inside the seal? I have looked on here...

So Gentlemen, it apears that there is no Metal strip that holds the seal in place, on my Series2 it is a lip above the seal which is part of the iron work which is the sill itself, however on my Series 2a there is no lip on the sill iron and no holes for the seal to be riveted/screwed. I have...

Webley1991, I will be taking the strip off my Series 2 when I get home at lunch to see if I can just make one up but not having many bending tools, I might still have to buy one but when I get it off I will post a pic on this thread :) providing the weather is fine enough as we have had not nice...

Land Raver, I have had a quick look at LR Series web site but will have another look after work or give them a call, I never thought of Dunsfold as I thought it was just a Museum after watching a 4x4 is born, so thanks for the heads up on that.

Land Raver, your Series is gorgeous, I thought mine was nice but wow. I have the seals and the metal trim strips on the front doors of my Series 2 but on my 2a they are missing, I know I can get the seals but it is the metal trims I need. When I get chance I will get a pick of the trims on my...

I know there are seal kits for front doors but can anyone tell me if there is anywhere that sells a full kit with everything, the bit I need most runs along the floor, I think it has a metal plate to hold the rubber down. The problem is a couple of weeks ago my little lass drop a ds lite game...

Thanks for all the tips, I will give it a go without grease anyway. Does anyone know the size of the nuts and bolts for the bushes, is there a kit for the that can be bought from anywhere, although the ones that are on dont look too bad, I have had experience when I have had to cut and drill...

I have no clue how to do that, guess I will have to ask google

Thanks for that Blackburn, cant wait to get them in now. Webley were you building a new chassis, I hope the weight of the engine will be enough for the job in hand. Sweet 16, so it is long wheel base rear shackles to use!! Does this lift the Landy with no problems to props etc?

I have uploaded an avatar pic but unfortunately it is 256x256 so will not show, please can someone help I have tried my best to shrink it but unsuccesful

Not been underneath as yet, just got in bed as am on nights, will try and check tomorrow, and if I cant see I will try post a pic but tried to put an avatar pic on earlier but it wont let me with my new phone as the pic is 256x256 so dont know if I can put pics up

Thats great Turbo, I was going to call the shop to see if they had sent the correct kit, have you any idea where the two larger bushes are for? Quite a good kit, it came with all new damper bushes too, only thing I dont like is they are orange, will have to paint them black I think.

I have uploaded an avatar pic but unfortunately it is 256x256 so will not show, please can someone help I have tried my best to shrink it but unsuccesful

Hi all, I have just received a Polybush kit from John Craddocks for my S2a/3, in the kit there are two larger bushes, does anyone know which they replace? not been underneath to check yet and just about to go to bed. Something else that is obvious about the Polybushes is that they have...

I see what you mean now, my pal at work just found a pic of a 2a with lights in the wings and the passenger wing doesn't have the heater, the wings are identicle otherwise, not the bug eye type. My bulkhead is series 3 yes so what happens next, I was thinking to buy a series 2 galvenised...

Anything before 73 is Tax Exempt! So you saying all Series 3's Pay Tax? I had a look on that link CalumM posted and found this, this describes my 2a down to a "T" Late Series IIA Land Rover(1968/9-1971): Headlamps are on the wings, but the radiator panel is covered by a metal galvanized grill...