I was thinking that myself , and genuine kit is around £45 . Yes no problems doing it myself just thought ask on here for other ideas or anyone had same symptoms in past .

certainly worth a go changing it , I Still have my original but loud pump so may put that in . what says to me it's more fuel because it's a pain to start untill fuel pressure builds up . I'm thinking worth a go with the pump just swap and see the difference . one in there wasn't a cheapie and...

loom is around 9 months old and clean. no fault codes either .

My 2004 td5 with 130k miles had suddenly developed a problem . It is down on power when engine is under load and missfiring and it a real pig to start and even after priming sequence still not easy to start . It all suddenly started yesterday and was driven local to me down a duel caridgeway...

I have watched it and all well if on a lift above your head . Different kettle of fish on the ground . Done clutches both on a lift and on the driveway.

Hello all , my clutch is feeling it's getting on in life . Pedal getting high and juddering when pulling away but no slipping . But also the DMF is clunking a bit more as letting clutch off . So time to change the clutch soon, I have ordered a powerspec kit from LOF . I replaced the slave 9...

Seems that way . I whipped my spare off and found embossed is 8j and ofset of ET 57 Looking like the offset of ET35 is closest I can find .

That's odd I did find more may be the d1 fittment even used there filter for make and year . https://4x4tyres.co.uk/product/16-x-7-challenger-5-spoke-black-et-20/chassis/5483/vehicle/Land%20Rover%20Discovery%202%201998%20-%202004/

Give me a minute il see what I can find

Only problem is the offsets are silly 0 or 8 which a huge difference to the standard 57

4x4 tyres have another design also , also think raptor tyres or raptor 4x4 have them

https://4x4tyres.co.uk/product/16-x-7-tuff-torque-8-spoke-steel-black-et0-2/?gclid=Cj0KCQjw3s_4BRDPARIsAJsyoLPu1eMKv-MyXGIp_4JmEQvjklPV51tcGfCz3aISWFf8RuWli1pm9_IaAnIZEALw_wcB

Cheers just have looked and the et35 will be ones I go for 22m further out . Thank you

I seen some on 2 websites . Unless on the 235 fitment?

Hello all , I am currently using 245 75 r16 on my d2 , but going to change to modular steel wheels 2 questions really 7 or 8" wide and et25 or et35 ? I can not find a explanation how they are measured or sized compared to the standard wheels . Thank you.

My guess was correct the D2 wizard turns up ! Thanks again . I saw a video on the yellow and green wire it is spliced into it thinking what's the point . Same as the 2 pin connection in the shuttle valve plate . The original circuit is still there .

Hello all , just took the shuttle valve plate off and a bit dirty in there bit no moisture or corrosion . So going to go with the mod . I see 2 ways doing it . One way splice into the 2 pin connector in parallel and leave the connector in situ. The other you snip the connector and remove...

They haven't turned up yet , in the post on the way . Was off a LR Facebook selling page . Mine originally a 7 seater bug never came with the 2 seats in the rear . This is why I thought I should really fit the bins and remove the headrests and change to a 5 seater .

Thanks , that is helpful, I'm waiting on some parts to turn up before go to the dvla. The rear storage bins will be going in also will remove the headrests and the belts .

I'm ok at some basic electrics and soldering I'm pretty good . But more in depth vehicle electrics is not my string point . Ie I can trace faults with lights or if something isnt working to find a break of fitting new lights from scratch . Just built a loom other night for old chaps norton . But...