Theres a few goodies there. I like the push start switch :)

Spot on Dave, I will make sure mine is drained as much as I can as I just purchased ready mixed rather than concentrate but that's a good idea with the concentrate first then water. Thanks.

£12.58 click and collect, buy 1 get one 30% off. Not a bad price for anyone looking :D Now im trying to work out If I should undo the drain plug on the block or just use the rad hose. Im worried not all will drain and I will end up mixing anti freezes when I top back up. Im still unsure on the...

Ye Its like squash just not drinkable ;) Might just get two of these to drop straight in. Triple QX 5L Blue AntiFreeze Summer Coolant Concentrate 5 Litre / Ltr Ready Mix | eBay Or as the Halfords one is Concentrate for the extra tenner its going to last longer.

This here is Concentrated but not ready mixed, so would that require 50% water adding to it lol? Doesn't take much to confuse me! AUTOCHEM 5L Concentrated Red Antifreeze & Coolant Longlife 5 Year Protection | eBay

So the OAT from Halfords you mix with 50% water? Wait no here it is http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_219452_langId_-1_categoryId_255224 So that would be almost £50 to change the anti freeze! What's the cheapest way of doing it, I...

Only duct tape is needed!

Anyone!

Hi guys, I'm learning a lot as I go and I'm soon attempting my first coolant flush. I've done a bit of a search and it seems some people use OAT coolant some people don't. I've read the RAVE on changing it and read that I require 11.5 litres. I have ordered some brass filler plugs to replace...

Bump.

Can't be right they give the measurements of the display and the probe is in the picture smaller than the display. I think it might mean 1cm.

I'll try take some photos when I have time in the light and explain a little better.

Ive just ordered a soldering iron so that and a pair of pliers should do me! :crazy_driver: Hopefully do a bit the weekend, ordered some wire, three way switch and my soldering iron. Ill try take some pictures along the way so people can laugh at my efforts. :hurt:

I rubbed what I can back, red oxided it, black hammerited then waxyoyled. For the inside of the chassis I will use waste engine oil.

Ok right ill use all that advice and see how well I can string them all together. Ill upload a picture as soon as I have some time to get to an electrical store for the odd bits to sort it.

Ah vaseline, I like it.

I quite like that idea. Would moly grease do? Is that safe exposed to the elements.

So in other words bullets crimped to a stub of wire, stub of wire soldered to the long wire then I can unplug if needed? Its a shame there isn't a T bullet that the wire runs through but then there's a female bullet on the tip of the t to plug into. I will think of the picture when messing with...

After 5 standard alloy wheel nuts posted. £15 for 10 Online but only need 5. To fit this style alloy

So single wire along bar and solder the lights along the way. Crimp loops with female bullets? Id like to be able to unplug lights if need be but soldering obviously then they are fixed unless the wires are cut.