Dribble dribble. Are they comfortable for every day use as well and long journeys?

Did it this morning. Complete novice mechanic I am. I had already removed the inlet manifold to clean that anyway. Took me an hr to remove all bolts clean them up, removed the gasket and cleaned the face. New gasket in and did the bolts back up. Three studs had the bolts seized so after Removing...

It's 300tdi. I think I'm best to have a go at the bolts and see how I get on. Face the consequences if one snaps lol.

My front inner plastic wings I ripped out, it only allows mud to trap underneath and rot the wings. Take the wing panel off, weld what needs welding, prime it, paint it and waxyoyl it then rip the plastic bit off the wing panel, stick the panel back on and then you can jet wash it all clean when...

Well I have two hours tomorrow morning before work, I soaked the nuts in GT85 this morning to hope it frees them up. Ill give them another soaking tonight. In other words don't rush it and its simple enough? Do I take it all apart or just prise it back?

I cleaned out my intercooler and Inlet manifold yesterday and noticed my Manifold gasket has split. I purchased a new one anyway so have one ready to do the job however I've never attempted this before. I can see a series of nuts that screw onto studs that remove the exhaust manifold. I can...

That's the answer I was hoping for, at least it contributes to my new pair of boots. Any suggestions on a nice tyre for a good price. I like your tyres on your thread.

So 2nd hand remoulds are worth nothing? Probably just stick em on ebay. Contradicting views all over the forum regarding remoulds.

Im looking to fit a lift to my disco and get some 265 75 16 boots on it. I currently have 235 75 16 Insa Turbo All Terrains on with plenty of tread on them. How much should I expect to get back for 4 with Land Rover Alloys? Also where are doing good deals for tyres at the minute on black...

Hacked mine off with a Hacksaw whilst out offroading.

I haven't been on last two days properly but I've been monitoring it and I've been out shooting tonight and it's had some use down the lane and seems perfect. Cars starting fine no problems. The only problem I do have is the light is reflecting in the windscreen and actually hindering my view in...

It's a bit pricey if in fair condition I'd expect to pay around 1100, time of year though I suppose. Just poke everywhere for rot and ask the owner to jet wash the underside before viewing. If it's caked in mud you won't see the rot as well. I bought a rot box and didn't quite know what I was...

How much for complete lock barrels and keys from both front doors, rear door, fuel cap and ignition posted.

What size tyres are they and how much? Also how much for the complete lock set, the drivers, passenger and rear door locks with keys and the fuel cap, maybe ignition if you can get that as well.

Are you trying to get a wire from your battery through to the cab? If so through the grommet above your accelerator pedal.

You are answering your own question then. Go for it!

Safari looks sexier ;)

As in take all the panels door off etc and dip the shell to galv the floors the boot the body mounts the wings etc.

If someone has the cash a build topic with a body galv would be interesting ;)

Bit of Gaffer tape will fix that ;)