Have you checked the shocks and springs? Steering damper and rubbers?

I have one on the rear of my V8i you can have, unfortunately it comes with the rest of the vehicle as well! 92 (K) V8i yours for any offer over £1000.

I would go for a V8i auto, may be that is because i have one. petrol comsumption is not as good as a diesel, for off roading the auto box means both hands on the wheel and not having to worry about changing gear.

I'm impressed, do you work in the motor trade that you are such a dab hand at welding, grinding spray painting, maintenance etc. I wish i could do the same to mine, unfortunately dont have the kit or the room and the spare car to do it. great picture set of the progress.

How much are you spending on it? i have a 92 (k plate) for £1600, v8i 3.5ltr, done just over 100k miles, bring cash and drive it away

Does it make your HT leads nice and shiney, full of body, no dandruff?

wd40 should work as well.

The manual says to use a low pressure hand operated grease gun. why would anyone use a high pressure grease gun unless he thought he was waxyoiling the chassis!

Interesting point about the wirse being cut, as my Brake wear indicator light is flashing on and off, having looked at the front pads found that the cable was cut, thought is must have been going and finally parted, reconnected with a terminal block, light is still flickering, if you say the...

Shim pads available from rimmerbros for just under £2 Part Number 591628 Description SHIM PAD REAR - LH.OUTER & RH -INNER Retail Price £1.55 inc. VAT (£1.32 exc. VAT) cheap as chips

Sounds very nice, will really like to see the pics, how much did the custom work set you back?

RAZ8550TDI, you are not in the Dorset area are you? seems like you are a dab hand at welding. If you are riveting the pan in place what sealant would you use to make sure it is water tight?

Hi Guys, looking at thos pics, my pan does not seem so bad, on the pic with the red circle, my rust crack goes accross the car instead of along the car side. I took it to a Landy garage near me that does all the farmers landie's, he reckons the cross members are ok, just the floor pan. Has...

Tis very true, they give you a great smile every time you start the big engine up and the car rocks under the torque of it. thinking of passing mine on as it is now a welders paradise, boot pan on the way out and front wheel arches are pock marked with rust holes and crunches when you push on...

Sounds like you have a fuel mixture problem, are you running with carbs or injectors? if carbs, check the fuel air mixture and jets for clogging. Plugs should be a nice biscuit colour if all is ok.

lol, so i can have nice holes in the floor pan and it will still pass a MOT.

sills had to be done when it went in for its MOT, cost £300 for all the welding and they missed the floor pan.

Try disconnecting the battery, does like a normal pc if it gives a problem, power off and on, it worked on other vehicles that i have had.

Funny indeed, pity it did not have the response of the other half, that would have been the cherry on the cake.

Hi JAC, alas no.