Cheers Roy, Really appreciate that, will play this weekend and as you mentioned I will try and create a table and see if it sheds any light. The problem with the M & S lights has only occurred with me this last week, but I have had to clear them now about 6 times in the last few days, this...

Quick updates as in town having a coffee, after clearing down the codes before leaving home, they reappeared almost instantly after doing a 5 point turn trying to get out of the drive, I cleared them down again after I got to town, this time using the iCareSoft LR v2 reader which I left in the...

Thats pretty nice, great find, thanks for this.

Cleared down the codes today and took it for a quick spin, so far no Limp Mode but have to pop to town later so that should give it a bit more miles to fail on. I have been trying to check through the wiring as per instructions on this site via a couple of other threads, I cannot seem to locate...

Thanks a lot for the info 'Sierrafery', great find, does not make a lot of sense but the more that I look at what I can find here it certainly is looking like the XYZ Switch, that said I read another post about checking some connections under the passenger side glove box and also under the...

Thanks Griff for the info, I have tried in the past to register on that site but I never get the registration process to complete, just keeps going round and round after hitting submit and not getting any further. Thanks anyway.

Having been introduced to Nanocom recently and now owning one I have been trying to diagnose a problem that happened the other day, but sods law you drive around for days and it does not show up at all, and then today it did! Yippee, or Bugger, anyway I had the dreaded Limp Mode M&S flashing...

I had Jason call round today with his Nanocom and a spare MAF filter, after doing some driving and looking at the live readings from the Nanocom we found my MAF was indeed faulty, so he kindly let me have his spare one for a very reasonable cost, after playing around we could not replicate the...

Thanks for the kind offer, if you are happy to then I would appreciate the help.

Thanks for the info, will give it a go once the bloody weather gives me a brake.

Does anyone have a PDF of the AudioLeads.co.uk P99-X30 Adaptor, I am in the middle of taking out a radio from a Discovery 2 that I have just been given that has been really bodged and as far from neat as you could get, I just need to know what the White, Black and Red leads from the unit are...

Thanks for all the comments, giving me loads to go on... Discovery 2 2001 TD5 Automatic, sorry for missing this out... Will the car run OK with the MAF taken out? I am hoping that this is not the fault, they are bloody expensive and it would have to wait till after christmas before I could...

Yes, sorry should have said, YES it is an Auto... I was given a Nanocom with the car but cannot get it to do anything, its an early model with no display, meant to work with a laptop, tried to contact support but you need an ID which I cannot get, so it looks like this will be going in the bin...

Hi Guys, Seeking a little help in diagnosing a problem. I have just picked up a rather clean Discovery 2 TD5, the basics are that the car drives well, brakes well, nothing at all wrong with it, the only real mods that I can see are the EGR valve has been replaced with the straight tube, and...

Does anyone know where I can purchase a Full Overhaul manual for a Diesel Discovery 3 Engine Purchased 3 off eBay so far and all scam artists. Any help much appreciated.

Does anyone know if there is a guide anywhere to how I remove the centre console where the radio and air control knobs are, been trying for days and there must be some hidden screws or a knack that I'm missing somewhere.

Does anyone know where I can get a front passenger door for a Discovery 1 1998 from within the UK, I have looked on eBay and nothing available unless I wanted a rotten one, really don't mind arranging collection via courier if need to. James (Isle of Mann)

Any idea what the size of EGN 100090 are, I want to order some Stainless Steel ones before I do the job...

Just been fitting springs to the drivers side doors, the rear was a doddle to do, well except for the actual fitting of the spring that is, that was a real pain in the a$%e, but finally sorted, refitted and working a treat. My problem is the front door! What a pain to sort out... even with the...

Hi Mogindo, My idea might have been a little over the top, but i could not find another solution for opening a door that would not open, by key or by accessing the innards of the door through the holes in the inner door shell. I was hoping to get an idea or help from the forum, but it...