OK got my act together and found the gear box part on the Nano. P0705 POSITION MONITORING SWITCH Presume thats code for XYZ? Correct?

I have got a Nanocom but I sheepishly have to admit that I dont know yet how to use it for this. Only used it so far for the suspension!

Hi everyone. 2000 4.0 Thor 80K miles This problem hopefully someone will be able to identify before I start ordering bits haphazardly and just hoping for a result. I have had a trawl through previous threads but cant find this specific set of conditions so please bear with me. Ist experience...

Blimey even my old BSA Lightning had a dip stick. Talk about antiquated.....but thanks for the info. A. will it be a fix for my reversing problem. B. am I right in thinking there is a filter in there to change?

Hi All Had an incident today. Reverse kept jumping out from R to 3 after a couple of seconds. Went up and down the gate. Did it again and again. Repeated up and down the gate and after about 3 minutes panic appears to be clear.....but unnerving and need to know the reason. Had a friend check the...

Starting problem is not a problem really just a niggle. These things should fire up immediately but sometimes, and that seems to be when warm, it will crank for a couple of seconds before firing.Oh dear you think its not going to start feeling- You know back in the day when you used to feed in...

Yep no problem there so....back to the drawing board then! Cheers Simon

Just between and behind alt and a/c pump correct?. Definitely 4 wires in. What reading should it give when cold. Daft question I know it should be 0 or more normally some degrees? Current thinking is that I get good starting from cold but hesitant when hot so maybe slightly faulty ECT. Thoughts?

Had to use the screwdriver as it is so high up and it was a tight squeeze under there(no ramp you see) and presumed the valve was stuck together. If that is the right fitting why is it above electrics?

Hi Have replaced all I can to try to settle my occasional warm starting problem. Happy to do this as I like to get to know the engine and after 80K miles replacing is no bad thing I reckon. However the only part yet to change that may have a bearing is the ECT sensor as apparently it is the...

Hi I have read about the recurring problem of water spraying onto passengers feet(get a new car she said!) so was able to check it all out today. Located the passenger well rubber pipe which was patently seeking to burst its banks so I went underneath where I was expecting a pipe coming sown the...

OK thanks to all. Followed the detailed instructions on that link and it worked like a dream-have now got a glove box back! Was able as well to address the bunged up condensation overflow.....see my next post!

Thanks for replies. Most helpful. Will attempt it when the heat dies away. Cheers Simon

Well no. Did not know it existed. Is there a solution? Please

Oh blimey.....what switch?!!

P38 Thor Hi I am currently changing the interior of my P38 so It has involved a fair amount of recolouring work. All; has gone great until refitting the glove box. Fitted the damper and hinges and closed it. Now it will not release even after a lot of quiet contemplation and shouting!! Any...

Good thinking...will do. Thanks

P38 4.0 Thor 2000 Hi All Just a quick one as I know its been covered before so apologies. I am going to invest in a Nanocom and just wanted to check that this is the correct up to date one? NANOCOM Evolution for Motronic P38 kit Code: NCOM07 Many thanks Simon

OK an update. I now know Britpart coils are not Bosch but Chinese (how come one never learns!) so I bought some Bosch ones. Took a deep breath and removed the manifold which unsurprisingly was much easier second time round. Replaced the coils and had a good mooch about checking all my work...

Yes Martin did indeed come up with the goods. Excellent service and helped on a few other things as well. Definitely worth the fitting charge/journey. Thanks for all advice. Continuous learning curve I guess.