sounds like a sticky calliper to me, calliper pistons may need a clean up and apply some copper ease to rear of the pad on reassembly.

i went, was good, bit wet though! Was hoping to make some £ towing folks out!

What was the problem b4 u started? B2T, i fitted my babys car seat in today............... And tried the new key! Yesterday was better drained the excess oil out the engine over a litre :(

Could be differential, hard to tell like the others have said! Stick up your location and im sure someonw will crawl under there if your really stuck! Either that or fit some free wheeling hubs! This will just cover the problem its an option though.

Welcome, Series are nice and simple and a joy to work on! Good luck with your project!!!

Yeah I agree with the others on here, Land Rover seem to use the theory of 'Why use 4 bolts, when you can use 5' I broke a part of a series bell housing off, bout a fifth of it as i remember, i was trying to jack the gearbox in with bolts and the input shaft wasn't lined up on the splines. (I...

I would change pressure switch, filter and oil! That'l probably sort it!

Welcome to the site, Im new too, the advice i would give when looking for a disco is: Go and see as many as you can! Check for crunching in gears between 2nd and 3rd and visa versa! Check behind the cylinder near the bulkhead for leaks from the head gasket on tdi's. Check inner sills...

Hi Everyone, Just found this forum and decided to get involved. I've owned Landrovers for a long time, having my first one a 14. I've just got a Discovery 200tdi to use for work as I have changed my job and lost my work van, so was a ideal opportunity to get a new addition to the...