I would invest in the Nanocom for the rest of the car👍

So you can rule out previous unless it returns, the wheel speed sensor is tied into hdc, abs and suspension. I'd be looking live readings at the wheel sensors below and around 5mph. Look and see if there are any glitches and uneven readings on all and specifically the rear left sensor or abs...

You may have bought a real pauper car😩 My son's was a neglected car when we bought it, a complete replacement front axle from the outset and a further 2000 euros in parts followed shortly... She's now doing her bit and has done reasonably well for the last 3-4 yr. ☺️

It can, one of our bods just had this🤔

15mm longer my mate. I did think about using my own pump and input shaft and possibly the tail piece (yet to be verified) 🤔

Right then, after seeing our mate @Datatek last Sunday I am now the owner of a zfhp24 box. After comparing a couple of things the input shaft and oil pump drive are different lengths. Now the question... Can both the input shaft and oil pump shaft be taken from zfhp22 and transplanted into...

@kurtjohnson10 👍

Wait until your see it off roading, they are quite capable 😜👍 Not rock crawling or the like👌

I've got a set like this on mine and some on Elliotts bus as well. I'd also found corrosion inside the original positive connector 🤯

How long after it was started had you tested the battery grrrrrrrrr? 🤔

There would be fuel pressure faults in the engines ecu to start with👍 Have your battery checked for capacity. It could be tired.

Did you get the specifc codes? Was the live data read for the wheel speed sensors while the car was moving?

.... No offense taken, you Leyland driver you😜

Have you done the regulator swap? 🤔

That and brake cleaner😵‍💫😵

there you go and I agree🤣

Have the rings checked on the drives shafts that enter the hubs. The rust can also come from the abs rings on the Cv joint heads. 👍

Do you ever have the indicators flashing with a no start situation?

So what you really need to know is what's wrong, regardless of others experiences. Do you have a vacuum pump to check the servo? Do you have access to a smoke machine? Have you checked the draw on the vacuum pump?

Mine doesn't hit the bump stops if and when I get a fault any more and I've no idea why?? The only thing that has changed is a repaired faulty driver pack but I don't this changed any default programs in any way. It goes Into dormant mode and presets to normal height 🤷 Crap.... That's blown...