Sit down, now look into my eyes🤨.... Now get out!! 😜

Wednesday night coming over the bridge👍

Dot 4 all day 👍

On mine, I unbolted the compressor from the engine. Lowered it down as the pipes are flexible. I did struggle to get the clutch pack off and caused a little damege as the bearing has a circlip on the end of its bushing... Mine doesn't anymore🤣 I renewed the bearing and using strong loctite to...

Normally replace the clips, coat them on a little grease as it'll aid replacement and keep corrosion down👍

If you can before you buy it, hear it running from cold👍

No, there's nothing the risk to make you feel alive😜 Or pain🤔

Oh dear, one reason I wouldn't own any Landy with the 2.7d or 3.0d😕 If it is a crank issue they can crack the engine block due to the way the crank bearing blocks are bolted into the engine 🤯

An hour tops, to cut and wire directly together. No more problems 👍 It would be handy to find out why it's disconnecting, maybe the wiring loom is in a bad position and it could happen again 🤔

That I understand 🤯

What finish are you after kiddo? Colour matched or just nicely finished 🤔😊

Ooh, I'd be pulling the head to check and gauge it from there, I don't suppose you have a picture of the marks do you 🫣

I'd be stripping that dodgy red stuff of that plug in your previous picture🤔

We are all a bit broken lads🤣

Ooh, Interested 🤨

One of you two has issues 🤣🤣 oh and a problem with your car🤔🤭

It'll be the leaking panel gaps and sealing that does that😕

There you go matey, it's coming 😀

We've had 12°here lad👌 it's getting warmer I promise 😊

Bloody snow? 🤯