No, it's not

Then you really need a diagnostics session cos it can be the MAP sensor at fault especially it's IAT side but this can be checked only with live data or eventually there is a fault code for it... though that's just a guess unless you want to start a "parts darts" game and replace the sensor in...

You are right, I edited my first reply

As long as the fob doesnt work it becomes immobilised once opened with the key, replace the RF receiver cos it's the most common cause for such intermittent symptom especially if you have two fobs and it behaves the same with both

Hi, the SRS light can have multiple reasons you have to read the fault code instead of digging in blind, under the seats or dash the only relevant connectors for that light are yellow or red, that black plug is unused

I dont know that tool. If it's multivehicle type which lets you select the vehicle modell and covers the D2 and you can scan each particular ECU (in this case Td5 engine management/powertrain/what ever they call it) then you should try, if it can record the data it's even better. If it's generic...

As your door latch seems to be fubar as well and you can't remobilise it with the EKA code all you can do is to replace the RF receiver and hope it's that otherwise you'll have to replace the door latch actuator to be able to insert the code or things can become more complicated

almost, it's for MAF, wastegate modulator and EGR(hopefully this was bypassed).... though the best would be to see some live data from a ride when the symptom occurs, that would be the really relevant thing

then most probably Eu3 confirmed if the airbox sensor has 4 wires

HI. Remove fuse F2 from engine bay and see how it runs that way and report... also is it Eu2 or Eu3 engine?

And did you rule out the IDM and BCU both without success like the OP?... if not do those first as it was already explained in this thread

What happenned when you clicked on superlock off with nanocom outputs?

The BCU doesnt store fault codes , check the user guides https://www.nanocom-diagnostics.com/downloads

As you have nanocom you should try with another known good unlocked BCU if the IDM was ruled out

You should have use the unlock command before disabling things cos if it was locked with enabled superlock you should unlock it the same. Let superlock enabled when you unlock cos if you disabled it before trying to unlock it's possible that the superlock motor doesnt work then. If after that...

Use a lubricant spray which has a flexible nozzle , something like THIS , see if you can reach it better through the under dash compartment where the fusebox is

As i said you have to record the "inputs fuelling" on card during a drive not fault codes

Fusebox is in the compartment under the steering wheel, ign pos 2(as to bring on the warning lights)

If a CDL is fitted with the proper linkage you must push the lever to the left to lock the diff no matter if it's in high or low, see this video from 2.20

In most cases, OEM means nothing these days if the brand is not clearely mentioned, it's just a marketing scam, the only reliabe suffix is LR for the genuines and those parts are coming in the LR box