i have had trouble with the air con in the past. i have recently replaced the condenser. i tried the air con on the rest of the journey and it worked fine freezing infact

at the time when the wistle started the fan was off aircon was off. i turned them on to all positions and temperatures and it made no difference. it even carried on when the engine was switched off

just coming home on the motorway and all of a sudden heard a high pitched whistling noise from behind the dash? tried the heater hot an cold all directions it was fine so i pulled over and tried the suspension up and down it was fine so i turned off the ignition and after about 20 seconds the...

i had similar issue although 5-10 seconds to start. i changed the plugs and the pcv its brought it back to 2-3 seconds.

just changed the condenser on mine i had a leak i couldn't find its cured for the moment?????

oh i see you another post say where you are

where are you based some one may reset your suspension for you

possibility kev but im leaning towards leak as when all the gas had gone it was warm both sides and when re gassed cold both sides. im thinking when one hot and the other cold was there was only low pressure from the gas. it wasnt long after the differential in temp each side that the air con...

yes thats what im hoping your lead couldnt supply he was out of stock got a new one for 86 quid seemed perfect

so continuing with my problem of two years aircon looses gas i have today fitted a new condenser which was a pretty easy job the only slight difficulty was getting the align pins from the old condenser (used a blow torch) and getting them in the new condense (henry paper and put them in the...

i had it changed before at 80000 and they replaced all but two of the torx bolts with 10mm head bolts so it wasnt to bad getting the pcv off and on my difficulty was getting the cyclone to hose jubille clip on and done up!!!

im going to try that tomorrow although i have no air line im going to try a bit of wire fed from the cyclone end. can anyone tell me if the cyclone is an empty shell or it has something inside? the reason is it was a bloody night mare to do the jubilee clip back up when i had cleaned it

ive looked and cant find any valve either they guy salmon mechanic giggled and said there's no way you will blow through there's a valve that opens under pressure???

thats the one| ive done new valve cleaned pipes which are good condition cleaned cyclone just that pipe to go. i think its a goo idea to disconect at the banjo and try to spray something down it . as far as removing it my arms wont physically fit in the space so its the only option

just spoke to a mechanic at guy salmon hes told me theres a valve and i would not open it with breath pressure. however im wondering if the cyclone was so gunked up will the metal pipe be also? the answer is take it off and clean it but doing that seems out of my reach any body done this before?

tried both no joy, believe it the return oil???

decided to change the pcv yesterday i had it done at 80000 but im nearing 130000 now. the valve wasnt to bad however i stripped all the hoses an the cyclone and cleaned them they are in good condition but were near full of a gloopy mess. the small pipe under the cyclone is metal i attached a...

INSTALLATION KIT - VUB503870 sorry meant this

LKJ000060 is this what your looking for??

fitted ngk iridium seems to be an improvement or maybe old plugs were knackered:D