Take front grill off and check rad for rust or missing cores. Easy 2 min job. But id say rad as mine was the same on 300 n the top right corner from front or motor was rotten and stoppin flow. 70 quid on new rad and hour or so work

Id say rad as cores might not b lettin water thru. Change rad then bleed up should sort it

Get a 3 door commercial liner off ebay not metal but plastic

Have u checked wire hasnt come off the solenoid

The defender 300 came with a decat as standard. My 300 disco has a decat fitted and mot time it get

When i replaced mine they had nyloc nuts so good to knock in from bottom and hold but to align up n the open end spanner should tighten it up

Chop sill out then cut the body mount rubber bolt and then remove. Or cut floor

Have u checked starter isnt becoming lazy

New stalk needed

Stick new pump on it easy job to do

Doesnt that light work off the same circuit as the door shut connectors and the interior light. Try 1 of them isnt jammed. Or remove cowl from steerimg wheel and check for bulb or wire loose

Have u got a heater in the tank to heat the bio diesel up. As its gettin cold itl thicken up. Starvin it basically. Ive known people put 12v kettle elements in tak just to heat up off a swith

I use the good old ebay to source my parts or totalparts.com in skelmersdale.

Easy to fix mate but i dont think thatl cause a wobble like imu said up top. 3 x 1/2 bolts remove them and wiggle the collum out.refit new 1 and make sure steering straight and the grooves line up on box end as there a groove on the shaft itl fit 1 way. The wobble your saying up top is likely...

The nut was full tight as couldnt get torque wrench in due to steering guard.

When mine got wrote off after truck rolled bk on me n dented bonnet. I got 1500 quid n keep the car 60 quid for bonnet and vic test. They wrote mine off because they dont want gas guzzlers on the road.

Gd thinkijg il do that tomorrow and then stick a new pin in it aswell

I fitted a nrecon steering box the other week and a power steerinv pump and new drag links at the same time. I refitted the drag links and passanger side has stayed tight with pin in. Drivers side which goes thru the drop arm was making a noise and upon inspection the pin is in place but the...

I fitted a recon steering box the other week and a power steering pump and new drag links at the same time. I refitted the drag links and passanger side has stayed tight with pin in. Drivers side which goes thru the drop arm was making a noise and upon inspection the pin is in place but the nut...

U tried spock. Bit like gumtree.