Mark1993

Member
Hi everyone,

I just bought some endcaps to finish of the front and rearbumper from my Range Rover Classic. However, I don’t really understand how to mount the side brackers (part 12 rearbumper, part 18 frontbumper), since there is no screwhole on the bumper endcaps.

Is there anyone who can shed some light on this?

Greetings Mark
 

Attachments

  • IMG_8881.jpeg
    IMG_8881.jpeg
    97.6 KB · Views: 18
  • IMG_8882.jpeg
    IMG_8882.jpeg
    71.1 KB · Views: 24
If it helps, I have those. And the rear ones require some brackets on the outer wings. The front ones, well, those required some creative drilling. In the end I drilled a hole through the bumper and used bolts to attach them. Not really happy about that, next time loose one I'll just weld the ends shut like supposed on the pre-85 Classics.
 
thanks for the reply! I already have all the brackets, but I just didn’t quite understand how to fit them. By chance I came a cross a YouTube video of a RR which cleared everything up.

In my opinion these schematics are a bit confusing though as they suggest you should fit the brackets the other way around….

Anyways it’s fixed now. Thanks for your help!
 

Attachments

  • IMG_8927.jpeg
    IMG_8927.jpeg
    36.8 KB · Views: 8

Similar threads