landyfun · Sunday at 17:15

Hi everyone
I have a quick question. The thread for the rear control arm is to short. It‘s an older Range Rover with a 5/8“ thread. Did anyone had the same problem?

300bhp/ton · Sunday at 18:38

Too short for what?

300bhp/ton · Sunday at 18:39

Looks like you are missing the large washers...

landyfun · Sunday at 20:22

300bhp/ton said:
Looks like you are missing the large washers...

Thanks for the response
Yess, it must be like 3/8 thick, that whats concerning me

Mark Piercy · Monday at 13:52

There should be a thick washer on both sides.
Arm=washer=bush =chassis.
Chassis=bush=washer =nut

Mark Piercy · Monday at 13:52

Also compare the old and new bushes. You could been supplied the wrong ones

landyfun · Tuesday at 09:03

Mark Piercy said:
There should be a thick washer on both sides.
Arm=washer=bush =chassis.
Chassis=bush=washer =nut

Thanks, found the washers, now it works

landyfun

Member

Attachments

300bhp/ton

Well-Known Member

300bhp/ton

Well-Known Member

landyfun

Member

Mark Piercy

Well fumbled member....

Mark Piercy

Well fumbled member....

landyfun

Member

Similar threads