Datatek
Well-Known Member
Plenum is the chamber under the plastic
Datatek
Well-Known Member
Only there briefly visiting relatives on several occasions, Toronto and Thunder Bay.
Nice one il definitely add this modification onto my list .
Flossie
Well-Known Member
One arm is slightly longer than the other, they look identical but are not.
If you look at the caps covering the wiper arm nuts, there is a little slot you use to ping them out with a thin flat blade screwdriver.
Good to know , being brand new to the P38 there is a lot to learn.
I had one of them in my 2A when i was going to college in the winter! Never had any flames though!! That might have been worth while
I bought one to use when my heater matrix leaked and I by passed it
My heater matrix on my P38 is currently leaking from the o rings after we changed the radiators.
Is it an easy fix ?
Yes and no. Easy fix with the right loooong screwdriver tool and driling a few holes (that the previous owner has already drilled), but fiddly too. They leak a lot. Some people change the matrix for an Audi one and do away with the O ring setup all togetherโฆ.. but that is a dash out job.
Search here, or Google it. Itโs been โHow Toโdโ a thousand times!
Search here, or Google it. Itโs been โHow Toโdโ a thousand times!
Last edited:
I changed to the Audi matrix without taking dash out. Visit PaulP38.com very good write up with photos on how to do it
I was just reading that...
Is it a neat job? I don't like cutting stuff up if I can avoid it....!
In my opinion yes it is .
