Had has a new bearing but yes probably used the senors he had already replaced. I will purchase a bearing in hopes that solved the issue. Thank you for help I’ll update soon

Brought a Hawkeye now. It’s showing air gap to large and broke wire not picking up thst wheel and when does it’s erratic. Guessing previous owner wired wrong or faulty wire ?

Don’t have a scanner thst will connect ethier been let down with nanocom/hawkeye.

Code is for the rear wheel still I’m sure but it’s been replaced. Also did have shuttle valve done tho about 5 months/3k ago

ONLY if the fault code is SVS related, it's useless for any other fault code

This IS the mod I mentioned in my PM. There is nothing wrong with it, it simply fixes a common fault some develop and does no harm at all. @sierrafery could explain this far better than me.

Obviously if I cannot rectify the problem I may need to as it’s over due a mot now. Failed because of them coming back. on way in

No I have seen this but don’t want to do it would rather sort the issue.

Hi unsure as was old owner. I have asked a mate to bring nanocom and another for his Hawkeye but awaiting them as said he did replace just sensor but no change so he then hardwired a new sensor. Still no change

Hi guys having some problems with typical 3 amigos. Trying to get her in for mot but seem impossible to get them out. previous owner had code thrown for rear pas sensor, Been replaced and lights remained Replaced again with hard wired to the...

Hi guys reading up on your post and i am having a silmilar sort of issue with the abs and can’t seem to get them cleared. Have replaced everything can think of and lights are still remaining. Any help would be greatly appreciated Cheers...