Yes. Will do. It's just having it's mot now it's drivable again.

Update. It wasn't the haldex module or pump. Haldex module tested by Haldexrepairs.co.uk. They were very helpful and gave me some pointers. After studying the live data on the Autel it came down to a high speed can bus error to the transmission control module. If that's not talking to the other...

Having a few problems with my 2013 SD4 auto. A few weeks ago I got an intermittent issue with the gear change between 5 and 6. It would try to change to 6 but drop back to 5 as soon as it changed. This problem seemed to rectify itself. Out on Sunday and twice it dropped out of cruise control for...

Bolts it is then and I'll keep an eye on it . Cheers. Tony

I've got some new bolts ready to fit. Looking at the replacement joint, it looks like there is a seal under the cover. Do you know if the covers are loose on the Original one. I was thinking remove bolts, re-grease and then apply some sealant before refitting with new bolts. Afterba bit of...

Hi. Recently got a 2013 SD4 GS. I've been giving it a good check over. I noticed that the rear cv on the prop is leaking grease round the front cover. I am tipping that something must have been disturbed as it had the haldex removed and serviced by the previous owner. Any advice on re-greasing...

Looking at getting another freelander. I have seen a FL2 with 140k on the clock. What sort of mileage are these doing before major engine issues. Anything else I should look out for? Thanks guys

Hi Folks I'm looking at buying a Disco (up to £6k). Question is do I go for a 2 or 3. I have previously owned Freelander and tackled everything but an engine swap on the drive so I'm not scared of a few repairs. The way I see it is that the Disco 2 is much more suited to, diy repairs and parts...

Sold my Freelander. Not sure if it's a happy or sad day? I've had one since 2003.

Should there be a cover in the plate between engine and gearbox behind Ird? I can see the back of the flywheel. Maybe this was it and it had fallen inside?

Im doing clutch on my Td4 at the moment. It's much quicker putting it all back. Clutch and gearbox fitted this morning. Gearbox mount secure. See how far I get today with it.

Thanks Guys. I have checked the links and don't think its the one listed. I followed more links and eventually found this> http://www.land-rover-parts.sk/files/freelander_parts.pdf 03-06 is listed as TDL000020.

Save your money and fit a Renault 5 stat in the top hose for less than a tenner.

Hi Does anybody know the part number for inner CV joint circlip please for a 2005 TD4. I have searched all over and can't find the details. thanks Tony

It fell out when the gearbox left the engine. Looks to me like it's been wherever it was for a while as this is its first clutch change.