Last photo looks like timing chain parts

In an ongoing effort to lighten the pedal in my Series 2 I fitted a bearing to replace the bronze bush in the linkage. I have also converted the hydraulic line to 1/4" courtesy of an adaptor from a Series 3 clutch master cylinder. These two...

yes they can be far away from the pedal assembly as some i have seen had them on the passengers side near the carby. but yes it is defo a booster as you can see the brake pipes going to it. if it was to play up youd not really need it to be honest.

its a remote booster, i think some landrovers used them in australia, and i think it was the series2a's that had them as they had no brake booster as the series 3's had and i think they used them on ones that towed heavy loads, but defo will be a...

I have a series 3 diesel farm run around. Would say poodling around the farm does not make the engine work hard so a good Italian tune up now and then clears out oily carbon gunge. 😁

Yup it's running a stat. :). Away from the car for a few days. Will drop a picture when I am back!

thermostat (stat) but if its breathing out the dipstick sounds like it has blowby either the rings are getting clogged up with carbon or the crankcase is not venting well through the breather. if you remove the oil filler cap when its running and...