1. Terry.Lane

    2 1/4 diesel

    It was really smoky, I took the head off as it was suggested that the head gasket had gone. I sat the valves, changed valve stem seals, and it is much better, but lots of heavy breathing and still a bit smoky..More than acceptable. Only driven about ten miles, made a few noises, power went flat...
  2. Terry.Lane

    2 1/4 diesel

    Hi all. My engine is a little knackered...I'm looking for a very good standard engine, west midlands or close... I could rebuild mine, but a standard exchange would be great... Anything? Anyone? Cheers Terry.
  3. Terry.Lane

    Looking for a little help...anyone fancy helping me to change a head gasket and valve seals...

    Looking for a little help...anyone fancy helping me to change a head gasket and valve seals? Dudley area...your place or mine...help!!!
  4. Terry.Lane

    Trying to see how to make a new post on my mobile...mmm

    Trying to see how to make a new post on my mobile...mmm
  5. Terry.Lane

    1978 series 3 easy project

    Hiya, Is it still going for sale??
  6. Terry.Lane

    stereo issues....

    nice one, i've had another thought, i could join the 4 speakers in the car to the front output, use the rears for the sub, use the blue wire as + and just splice the neg, how does that sound??
  7. Terry.Lane

    stereo issues....

    ye, if you take the original head unit out, you have the two euro plugs, power and 4 speakers, but there is also a white plug with six wires, two power and 2 x 2 speakers. in the rear door of the disco there is are two subs with a small power amp, there must be a way of running them without...
  8. Terry.Lane

    stereo issues....

    Hi all, i have fitted a new head unit into my 97 disco, the original one has the plug to power the amp and speakers etc. how can i get around that problem? i don't want to fit a multichanger, just enjoy cd's rather than cassettes!!! regards, T.
  9. Terry.Lane

    speedo issue

    thought it was on there..... near dudley, west midlands...... whats involved in changing the speedo... please don't say it's box out etc...
  10. Terry.Lane

    speedo issue

    hello people, are you ready for this one??? i have a 97 300 tdi disco. i bought it with no engine etc, but managed to find a classic which had been converted with a 96 tdi engine and box, done the conversion and it's sweet, but my speedo wont work... i have bought a brand new electronic speedo...
  11. Terry.Lane

    Hiya, I mentioned the miles but not the place, I'm in the west midlands. DY5 area. Have you...

    Hiya, I mentioned the miles but not the place, I'm in the west midlands. DY5 area. Have you found a landy yet? Thanks again, Terry. 07949 773638
  12. Terry.Lane

    ooops.......

    cheers yam. do i put up with it or will something end up breaking? cheers terry, an arm from the black ****ry anuul
  13. Terry.Lane

    ooops.......

    Hiya folks. After some advice.... i put some new parabolic springs and poly bushes on my series 3 a couple of weeks ago and as soon as i started to drive it i found a vibration at about 40mph, then again at around 60. It sounds like a cortina i once had with an unbalanced shaft that i fitted...
  14. Terry.Lane

    88" or 109" you help me to decide......

    I have a very lovely seies III 88" as seen on the pics, it is my first ever land rover and I love it.... however, my combo work van is playing up and I need to decide whether to sell it....problem being, my landy isn't quite big enough to get all of my gear in comfortably which means I would...
  15. Terry.Lane

    I'm excited.....

    i'm after a speedo / head unit from a 109....... i have the 705's on my 88" and the mph is all to pot,,, I've been told that i simply need to replace the head... is it true?? does anyone have one?? cheers, terry.