Sorry health problems meant that I was unable to work on the car for some time. I followed the instructions in this link. Door Lock Failure: Getting the Door Open (4.0/4.6/p38A) It worked for the car and also let me take out some stress on something that couldn't hit back. Everything works now...

Hi, Couldn't find a rent a ramp in my area ( Ayrshire ) but found this company. Extra Wide | Heavy Duty Car Ramps, Extra Long, Low incline Car Ramps for low cars, extra tall I have ordered a set for my P38 so I will let you know how it goes. :)

Not yet. I have had to order a new latch as nothing I did opened the door. I'll let you know how things go .

Hi, I am unable to open NSF door. The cable on the inside door handle is all frayed to hell and outside handle won't open door. Any ideas please ?

No. They were new.

Yes. I have recently replaced the 3 blend motors , but this fault has only came up in the last couple of weeks.:confused:

Hi, I have a 1996 P38 and have heater problems. The passenger side is fine temp can be set up or down but the driver side is cold only , which is a bit of a pain when it is cold and raining. Any ideas ?

EH No how would I do this?

Help my 1996 P38 hevac is getting right on my wick. Using my FCR tester Ifound my blend and distibution motors were knacked so I replaced them , bloody nightmare, but the fcr said they were still knacked.Anybody any ideas ?:confused:

Thanks for that. Stuck a Faultmate on to the car and got 4 faults all to do with the offside ABS wheel sensor.

I have a 1996 P38a that has developed a weird ABS fault. On passing under any pylon lines there is a clicking noise from the drivers footwell and the ABS failure light appears on the dash . Anyone have any ideas ? (apart from not driving under any pylons ).:confused:

Thanks you are right ! I used a DTI (dial test indicator ) and the disks are all warped to hell and back ! They are cross drilled to prevent this and I still managed to warp them ( foot is to bloody heavy ).:doh:

Thanks to everyone. The 3 amigos have disappeared after a small adjustment to the new ABS sensor (with a mallet).:)

255x65x16 michelin

My rangie ( P38) has really horrible wheel shudder under braking. It is ok until speed hits 50mph shakes like hell till speed is down to about 45mph and then settles down. I have replaced steering damper , shocks , and had tyres balanced ; still the same anybody got any ideas ? :(