Yes they are the facelift headlights. I did have a look through the owner's manual and searching through I couldnt find anything about the lever. Tomorrow I will take one off. Annoyingly I dont have the 6 point e 10 socket.

+1 for both ^^^ also check if the red plug is not full of oil if you didnt keep cleaning it from rezidual oil after you replaced the injector loom

You can ask him yourself, he speaks Dutch, French and English. His name is Robert and here I hope, if I can find it is his website. https://www.facebook.com/autoessentiel/?locale=fr_FR You WILL have to tell him if it is a facelift model or not...

Projector module. Is this for the facelift headlights? In which case why not just take one off and look for it? I do know that some cars do have this, years ago a bloke demonstrated his to me on his BMW and I think my ex- son inlaw had them on a...

Ok thanks for the reply a freind in England just sent me this info; Manual Adjustment: Locate the lever: On many Discovery 2 models, there's a lever inside the headlight assembly, often on the right side of the projector module, that controls...

The other known fault, well one of them, is that if your batt isn't up to snuff it might crank over but still not fire as the ECM doesn't see enough voltage. Try jumping it from another car, and/or get your batt properly tested. Frustrating, I know.

Hi Stewart You appear to have covered most probable faults although that is no guarantee you've cured them. The other possible fault for poor starting that springs to mind is the starter motor. There is a known problem of the starter motor where...

You may be able to get an earlier model's lights to fit in their place. I replaced one of my 2000 MY lights with one from a Disco 1 Which country are you in? Here in the south-east Tarn in France I see Disco ones driving around all the time and...

I don't think so.

Okay, I get the gist of the opinion on this group: don't overdo it. Not quite what I wanted to hear, but I do hear ya. I was tempted to get one of those tubular exoskeletons 'cos they look pretty boss. HOWEVER, I don't think it would look right...

Can't you buy a set of stamps and do it yourself? How on earth can it cost that much, i.e. take 3 hours? I've had the police come to my place and stamp VIN numbers on kit car chassis, it took no time at all and obvs in the Uk it was free.

So you are doing your pics in black and white now? Hmmm! But yep, very interesting.

I saw the most enormous caterpillar today: It was travelling across the shed floor as fast as its little legs would go. I wonder what it will turn into? Edit - maybe it's the larva of an elephant hawk moth.

Well dinner was a success, although we had to drive 1.5 hours in each direction in 39 degs heat with no aircon, still with the windows down and the roof wound back it weren't too bad. Dins was delish, fabulous place, and the owner, bless him...

Chatting to a ground worker on site today, a fellow Tratter nutter, worked in an LR outfit at some time. 'Either you get Defenders, or you dont..' Am delighted to reside in the former half of the statement. Obverously summink wrong with the rest...

You are a boat! Bit Of A Twonk 🤣🤣🤣

Be time to throw the towel in soon then 😃 but I got married at 17 still with the old bat 😉 amazing what love can do

Morning All. :D Having a little trouble focusing my eyes this morning, blurry edges to the screen text. :( Off to the sons place in a mo to feed his cats. Have a good day. :D

Yer obsessed ----- 😁

Yes thay really mucked up with the FL

Is that from a 007 film ??

and there was me thinking it was a "Byeway Open to All Traffic". My oldest stepdaughter is 57, youngest stepson is 53.

Frightening it was daughters 50th yesterday !!😕

Never before has a vehicle bin so good, that it needed so many mods to be bearable.

Does above a road count?

No air con in that heat :oops:

Blonde moment or wot.... Buoyancy Operated Aquatic Transport = BOAT Boats gets yer pants wet. 🤣🤣

Sorry, I had the wrong picture

I don't have a white beard