Us boys praaper appi yerv troyed. Laife be gude, grate tu zee yer agen!

Do what the other old person said , throw it out of the window and shout at it "Look for yourself you *******!" 🤣 🤣 🤣 🤣

Try reading it aloud, I sumtoimes avtu!!

I think this is good. I haven't done the wurzle translate on Duolingo yet. 🤣

Please 🙏

Great!! Seriously happy for you! :) :) :)

I’ve no doubt of it. The cancer department here is first rate and they keep their eyes on patients all the time!

----- and there's another one under the bracket at the top right in the photo. And protect those cables from moving parts.

Start by removing the screwdriver bit jammed under the hand brake adjuster nut.

Is that a filter in the brake reservoir or has it been filled with tomato soup? 😃

I've never done with with brakes, only on a clutch on an old Peugeot that was very difficult to do, but I think it would work. I got a length of hose that was secure on the bleed nipple but long enough to run all the way back to the fluid...

Or the very simple rubber tube with the bolt in the far end and the slit in the side. Cost peanuts and I use them all the time, I have even made one when I couldn't get one. Eezibleed is an oxymoron. Gave up on mine when it refused to work but...

Never had any success with that methond on any car. 2 person method for me is: 1) open bleed valve & assistant pushes pedal steadily to floor & hold. 2) close bleed valve & assistant releases pedal. 3) repeat 1 & 2 until no bubbles on fluid...

None other than, yep, put new cylinders on. If not properly bled the air in them, which contains water vapour, adds to any rust problem. Also they work over such a tiny distance that even if you take them apart and hone them, they often simply...

It's me again! Finally managed to find the courage to look at the rear brakes... I hate drums. Found that the wheel cylinders feel like sh*te and don't return when pressed, they go no pressure from the pedal until about 3/4 the way down the...

The cover to the one with the lock nut on should have a dimple in the middle, and be the only one that is removable! It is faintly possible that, once given all the security info they ask for, a LR dealer may be able to tell you which adaptor...

Superb news for a change, bit early to raise a glass I shall raise my coffee cup n do the dram tonight. Cheers fella.

Superb news for a change, bit early to raise a glass I shall raise my coffee cup n do the dram tonight. Cheers fella. :):)

We got drizzle think my barometer is playing tricks on me :rolleyes: Getting the chimney swept in a bit they are next door then coming to me, they are doing 5 houses here 80 sovs a whip.

Looks the bizz, one drove passed me yesterday it was shinning like a new penny red with chrome wheels n 2 old farts gents in it. :):)

Good news!!:):):) Hope they monitor you properly. Have a great day yourself!!:):):)

Morning orl. Us boys adder call vrum us gonzultant on Vridy. Er zez us be cancer-vree so us be well chuffered. Av tu geddus veet zortid now a then us be reddy fer ort. Vinylly goddus chikkins in proper owzin a fit fer winter. Zittin rume an...

Morning All. :D Me and Gwen are off to a show today. :) Catch you all tomorrow. Will try to get some pictures. Have a great day! :D

Thats great peeps will be happy to see you. :):)

I'm up the a82 in three weeks ❤️ will be good to get home.

No problemo :):)

Jazzy, I may pop in when I'm next up the road 😉

Got a few lengths of 6m 8mm100mm x 100mm galvanised angle iron oh yesss (Churchill dog) Tis wot I was chopping up today its getting used as a frame for my garage doors so I'll weld hinges on to them n fix them to the block work using sleeved...

:ttiwwp: Always wanted to use that :vb-biggrin::vb-biggrin:

Cant be much fun sleeping in a wet suit, it will be home from home when you have a pee at 5am but dont get up till 6am 🤣🤣