Should have been too drunk to be able to drive. And WTF happened to the barbies??

Something I never thought of before. On Wednesday when me n mates met up at our rally, they had set up their camper vans and me my little tent. So who got volunteered to go for the take-away curries because his Landy was still mobile? ------

I think a stand alone tent is a better idea too. What if you want to go somewhere and need the car, you'd need tp pack everything up first ... Those Canabon tents look good ....

Afternoon dullish an breezy Beef bin in oven since 10.30, just crispin it off now Very warm here (maybe cause ovens been on :D ) Rest and be holy all :)

Wooooottttttt????? Even though it's falling down?????? :eek: :eek: :eek: :eek: :eek:

... lawn has been mown. A sack of pallet-wood has been chopped up into easy to use kindling sized pieces for the wood-burner. The Rib-eye steak has been salted for later cooking on the barbecue. Herself wants me to make a decking addition...

I do hope the hymn sheet we are all looking at is the right one!! 🤣

Like your thinking ....

My vote would be either oil on the clutch disk, or a soft/broken engine mount on the front left.

I can see now where the designer of the Freelander got his inspiration from when he got his crayons and drawing board out.

I think I may have finally found a supplier of the capacitors I will need to fix the dodgy stats in this house. Phew, it has been a pain. Now just need to get some gea and get on wiv it!!

He said in post #3 there was no oil in the bellhousing and they changed the rear crankshaft oil seal, so unless it is clutch fluid, which would lead to a drop in the level.....(and I can't see easily how that would get in there.) So liking your...

Early motorhome............

Must be baby squirrel season. Little one on me garage watchin me frew the window. Eye ignored it finkin it be ok where eye was int kitchen. Burrit din't come down ferra nut so musta bin put oft.

I quickly ruled out a roof tent. I want something I can stand up in, not fall out of. And they don't come with a stair lift :rolleyes:

Nowt like one from the Boer war era!! Our neighbours in Hull used one, no pole other than the centre one, but loads of pegs attaached to guy ropes. 🤣

Ive had almost every set up, roof tents awnings every extra I could find, expedition trailers all sold but I will set up another rig at some point. Tent wise id probably go for a canvas bell tent. One centre pole & the a frame poles some come...

Yer dont forget your coat on the way out... 🤣 🤣

The one we had as kids (so 50s 60s) I used to take my ex around Scotland when we first met. It stayed in my dad's garage until he died ('98) when we gave it to the local scout group who were amazingly grateful. Bukta. Brilliant! Best of luck in...

I've finished looking into Landy-attached awnings and decided not to follow it up. Now looking for a suitable frame tent, 4-man type. I have my eye on a certain type made by Cabanon. Had one in the 90's when we took the sprogs camping and know...

Me too, as did Nole Edmonds. Git lived near us too. 🤣

Not gonna watch it. It grated on me too much "at the time".

Two other thoughts. Did you change the release bearing when changing the clutch? And what condition are your engine and gearbox mountings in?

AhA! Light-bulb moment!!! What about the bearing/bush in the end of the crankshaft?? Did you change that too? Click on this if you like...

You are most certainly right. I suppose I was thinking of peeps in my car club who used to skim bits of their flywheels to lighten them to get better performance, and stuff. Bit of a "doh" moment there!! TBH skimming it a few thou won't make...

You need to rethink that stan. The flywheel is skimmed over the whole face so the relationship between flywheel and clucth parts is the same. J

I'm thinking now it might be a good idea to go back to original style master and slave cylinders. Pain in the rear though it would be. Or else just live with it? My wife's Citroen C3 Pluriel does this in first and it is a Sensodrive system. I...

If he has had it skimmed then the pressure from the pressure plate would be slightly reduced. Don't know if that would be enough to cause this though.

Turned as in skimmed. As you understood I am Turkish and my English vocabulary about mechanical stuff generally comes from the youtubers that fix cars and Top Gear :) And yes the pressure plate was changed too.

Stick a patch of inner tube over it ?