You may well find you make your car go better and more economically simply by changing the exhaust. I did that to my D1 300tdi, it certainly gave it more low down torque and the mpg was the same or better. As I was going to do a lot of heavy...

I don't think you were directly insulting but I think you did made insulting comments about me to others that I could see. But there are a lot of people commenting here and I haven't really kept a track record of the level of rudeness of...

Also, re the "no one modifies cars"". Well loads do, I for one seemingly never stop doing it, but then I did run a Kit car club and there is little more modded than that except perhaps Rods and Customs.

Yes but Grrrr remeber he doesn't care about fuel economy.

You asked if it was crazy. Until you have actually fitted them and driven them you still do not actually "know" the answer to your original question, and I don't remember throwing any insults at you either, maybe you could quote my insults. The...

I doubt that we'd still be on here if we had thin skins. I can vouch for many on here that they really don't! My logic is pretty sound and you still haven't logically answered my last point! This thread may now be moved to AG as it has gone more...

if you guys didn't have such thin skins you wouldn't have thrown out so many insults that I have been laughing at. And because I have been laughing at them I don't have a thin skin. Maybe logic is not your strong point.

Some remain on here an amazingly long time, I could think of a few, but then maybe they just like an argument that they are never going to win, just for the sake of it!

Most of the "thin skin peeps" don't last this long !!

So is his actual question about getting them, or fitting them, or running with them? Even he doesn't seem to know!!!! I think he is up with a few others though on the "Do I have the thinnest skin on LZ?" question!!!

Actually I just got my answer 15 minutes ago. So your 1000 to 1 book is pretty funny. I should've taken the odds.

Well that'll teach me to post to you as I have done. Those who know me well on here will admit that I often make mistakes and usually admit to them. It could still be a crazy idea, fitting them may not be, but using them might be. So you...

That's exactly what we did, but it is still 4 flights, if I was a pedant!!! So yes, like last year where she had to fly back for just a 20 minute chat, it is happening while we are here. You don't mess with the NHS! Thanks for the good wishes...

Shirely it would have been easier to book 2 return flights🤔. So is this all supposed to happen while you are in France? cos that dont make it easy. Hope it goes well and its sorted this time. J

Sympathise re the coving. I once bought the plaster stuff as I wanted to paint over it in gloss paint. The room had a bay window with 3 panes so lots of awkward angles to cut. By the end I had inches to spare and had to make the last piece up...

Afternoon folks :). Been a while for comment, but bin watching you all;). Been putting up coving in the "east wing" We had a bit of a melt down that we dont have enough coving to do the 2 areas left:eek:, Of course we cant get it anymore which...

No you didn't he hasn't actually fitted it so he didn't answer your question. As I've been pretty friendly and non-dismissive towards you so far in this thread, albeit tinged with a little gentle humour, I think your answer it a little "orff"...

Time we opened a book on this. My odds on anyone on LZ knowing the answer to this exact question..... 1000 to 1. I reckon 157,213 to 1 assuming only one member knows the answer, and the OP will know one day. Or should that be 157,214 to 2 ❓

OK, there is a tiny chance you may be right, but then again, can you be assed to wait? Time we opened a book on this. My odds on anyone on LZ knowing the answer to this exact question..... 1000 to 1. Any takers???;););)

Yes, Kiddo!!!🤣🤣🤣

Well done for supplying this info! I too am hoping this will lead him to put us all out of our misery!! In the end, if they don't work for him I dessay he'd be able to flog them on for much what he paid for them. Also would give him the chance...

Casings appear to be the same fairly certain the rear subframes are too so the mounting points should make sense to be the same and from what I can find, the driveshafts all appear to have the same part numbers so I'd say it's worth the gamble to...

+1 on could be a long wait.

Shame it's an hour tween Thiefrow and Hardpenden, else you go over and take the pics when/if he does the biz!!! 🤣

Yes I know but I saw it and since people might not have read anything before the last comments it was worth putting that comment there for others. Not for you. So basically I was not posting to you, either.

The short answer is, no one on here knows. It does happen, we are not the fount of all knowledge. So when you find out and tell us you will have added to the knowledge bank of the whole LZ community and Wossis name will prolly draw a cartoon of...

and I learnt something. Thanks Stanley.

Get a lickle kid to help you, then he/she will be able to see if they go "round and round, round and round!"

and I wasn't posting to you, it was to @pwood999 🤣 🤣 🤣