• Stanleysteamer
    Stanleysteamer reacted to kevstar's post in the thread I would just like to say with Sad Sad.
    Send it to me, my coal is getting low. Our fire is on its lashing outside, tis like January. :oops:
    Jun 10, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    🤣 🤣 🤣
    Jun 10, 2025
  • Stanleysteamer
    Stanleysteamer reacted to PopPops's post in the thread Disco 2 FPR pipe unscrewed from cylinder head with Like Like.
    Thank you for confirming that. And good luck with your oil pump bolt. Don’t envy you, at least mine is all accessible from the top!
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to kevstar's post in the thread I would just like to say with Haha Haha.
    Mr 4 torques 🤣 🤣 Next you'll be saying your from Torquee Torquay...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    Tis obvious you's from north of Hadrian's wall. Peeps who live there call it Torbay. When i was in Exeter doing my teacher training we quickly learned not to call it what you just did!!! I think this will come under the heading of a tool I...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    Just discovered that W and I will now be getting the winter fule allowance, again. Though we don;t need it. Might donate it to Age Concern or summit. Flipping pendulam has swung too far the opposite way.
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Hippo's post in the thread I would just like to say with Like Like.
    Just watched episode 2 ov the secret life ov bee's on channel 5 catch up. @NorfolkBird
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    The torque settings on the sump for my TD5 are not high and there isn't much space to put one in to do up the oil pump sprocket bolt. My nomal 1/2 inch torque wrench does for everything else, but it doesn't go below 20 ft lbs. My old fashioned...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to kevstar's post in the thread I would just like to say with Haha Haha.
    Wots that for your Meccano set 🤣 🤣
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Disco 2 Bstard bolt came loose on oil pump follow up.
    I echo what @PopPops says. I do hope it all holds together. As a result of what has happened to you, and to kick off my so far laziness and complacency, I too am going to take my sump off and replace said bolt. All parts on order and will do it...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to davethebuilder's post in the thread Disco 2 Bstard bolt came loose on oil pump follow up with Like Like.
    Thank you yes it is great news
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Disco 2 FPR pipe unscrewed from cylinder head.
    I have to agree. I would do exactly as you suggest. Cleaning up the threads both internal and external before whacking on some Loctite. Very best of luck with it, Mate! :):):)
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to PopPops's post in the thread Disco 2 FPR pipe unscrewed from cylinder head with Sad Sad.
    Well, it’s happened again, this time from the cylinder head end, last time from the FPR. The diesel slick behind and the diesel stink made me think something may be wrong!! Luckily I was only a road from home and just got into the drive. The...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to kevstar's post in the thread I would just like to say with Like Like.
    I said to the misses the other night im not watching the news as there's nowt good these days, they go from people in was zones babies starving then jump over to Ronaldo who gets over 3 million a week. If you had that amount of money why does...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    In the meantime, after fixing it, sort of, with gaffer tape as the parts of the switch are basically falling apart, it is now OK. But I have been onto Citroen C3 websites both sides of the channel and it appears it is a bit of a common thing...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Dippypud's post in the thread I would just like to say with Like Like.
    It may just be the sensor switch thingy needs a clean wivs contact cleaner ....
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to davethebuilder's post in the thread Disco 2 Bstard bolt came loose on oil pump follow up with Like Like.
    Okay so sump off and check crankshaft for damage taking one main crank cap of at a time and then replacing they have stamped numbers on 1 to 5 the only one that was damaged was No 3 where the crank main bearings had spun but managed to get...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Stone56's post in the thread I would just like to say with Sad Sad.
    I do not envy you one bit we watch UK news here my hart sinks every day getting to the point to stop watching it to depressing 😩😩
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to saxavordian's post in the thread I would just like to say with Like Like.
    On lighter side
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to saxavordian's post in the thread I would just like to say with Like Like.
    The more you hunker down the greater these idiots win. I'll just add this to another page of memories of my area.
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Stone56's post in the thread I would just like to say with Like Like.
    The only crime lately over here was a rabbit got in the veg patch and scoffed 6 carrots, justice was swift
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Stone56's post in the thread I would just like to say with Sad Sad.
    Best put bars on your Windows, 😦😦
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Disco 1 my discovery 1 (1995) 2.0 mpi ticking noise...
    That seems a pretty extreme rattle to me all the same. Does yours rattle like that?
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to saxavordian's post in the thread I would just like to say with Sad Sad.
    A dispute over a bicycle locally. Just been for a walk to my local paper shop and stopped for a chat with neighbours who use social media. Local on local confirmation in a papershop. Seriously though my area New Moston is residential has really...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to kevstar's post in the thread I would just like to say with Like Like.
    Happy monday peeps, we got rain. I'll be in the machine with the door closed with the heater & radio on then. :)
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Disco 1 my discovery 1 (1995) 2.0 mpi ticking noise...
    Does it have hydraulic lifters? I think it is without finding very clear info on this, If so this is quite common and nothing much to worry about, If so, you need to isolate which one it is and change it or maybe service it if you can. (Use a...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread Disco 2 Headlamp security with Like Like.
    I used to stamp part of my drivers licence number on my alloy wheels in the eighties, got me a set back once
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    'mornin, (Just). Lovely day today, got up late and it is SO quiet! Went to a pottery and ceramics exhibition in Giroussens yessdi. Tis renowned for it and the streets are all full of peeps selling their wares. We usually buy at least one...
    • 1749468507034.png
    • 1749468552902.png
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread I would just like to say with Like Like.
    Morning Cloudy bright here Weekend show was wet and hardly any exhibitors, only about four tractors when usually 20+ I overdosed on Guinness in the beer tent Saturday night but great fun was had by all despite it being damp :p Suns coming out...
    Jun 9, 2025
  • Stanleysteamer
    Stanleysteamer reacted to saxavordian's post in the thread I would just like to say with Sad Sad.
    Gawd it's getting worse around here. A young lad murdered and the police arrested four one woman for aiding and abetting three teenagers in the killing. Last week a man went into my local medical centre brandishing a knife. If anyone wants more...
    Jun 9, 2025
Show older items