Thank you, for that, I posted from my phone and it wouldn't let be rotate it! Sorry!! Front Right Front Left Rear Left Rear Right 2.58v (500mm) 1.95v (490mm) 2.58 (452mm) 2.58v (464mm) It basically all started from when the rear right...

Hi Hope u don’t mind me adding , Out of curiosity have u checked the heights that ur suspension is at first plse Measuring in mm from the centre of each wheel to the bottom of the wheel arch liner in normal ride height, easier to place some...

Snap On Zeus+ All readings where measured and not the target/expected ones... Will unplug and see what I see... Thanks again!

So, I have plugged into a friends Discovery 4, and this is what there readings were, and this one has no faults! Front Left Front Right Rear Left Rear Right Access 1.58 3.38 3.38 3.38 Normal 2.20 2.80 2.80 2.80 High 2.68 2.35 2.35...

I would 100% agree with you, but I have had the vehicle just over a year now, and the issue only started after changing the right rear sensor!

I am glad you agree with me that the front left is the one misbehaving, I have checked the feedback voltage at the sensor, and checked the live data and it matches, so I am happy the scan tool hasn't got the postions mixed up. Thanks again for...

Thank you for the replies, I appreciate it! So, are we talking the wiring at the right rear sensor the orginal fault which was the start of all this, or the front left with the strange voltage issue? I do not understand how we can have 3...

I haven’t checked the resistance in the wiring but with three being same it made me think all four should be the same, so should it be two and two? So the fault could still be on the right rear, the original fault location The 5v supply is...

Hello, please be gentle as this is my first post here! 2010 Discovery 4 TDV6. Had a code stored relating to the right rear level sensor, so replaced, on a road test the suspension fault message came up, and the suspension crashed onto it's bump...