Hello I have a garage with a log jam. In need of help rolling out a series 3 chassis/splitting engine gearbox transfer case - installing clutch realease and then re-assemble and drop engine/gearbox in to chassis....all a long story. It's a 300tdi in to a 1971 Series 3. Chassis mountings are...

The discs have been sitting on my garage shelf for a few years, brand new - Lockheed Delphi front vented discs BG2612 for Landrover Defender 1990-2016 and Disco 1989-1998 plus various other Landrover models. Purchased for my Rangerover but then sold the vehicle before changing the discs. £65.00...

Range Rover Classic Workshop Manual 1986 - 1989 Petrol & Diesel Condition is used but in very good condition - located in Suffolk and willing to post but would guess postage at around £10 .... £25 including postage ....

Ah, I can still raise the engine at the moment (mounts are just tack welded) but not too sure how much difference that would make owing to the angle - suppose I could also raise the transfer case mounts slightly -

I thought the 300tdi would be okay too - some photos on google show a skinny prop but do not say where from... Could do a bit of sump bashing but the prop actually touches the corner of where the engine mount strengthening joins the engine bellhousing area. An extra thin prop from a specialist...

Ashcroft adapter plate

Hello I have the engine r380 gearbox and the series transfer case all nicely lined up but have just realised that the front prop will touch the corner of the sump. I have spoken to a propshaft company who will make a thinner prop but it will still only miss the corner of the sump by about 15mm...

Yes, all correct although the crankshaft pulley bolt is off centre with the hole in the cross member.

Yes, that's what I've checked - spirit level on the chassis then on the rocker cover but was waiting for someone to say ah or but !! If this is correct then I'll go with the top of the front pulley level with the top of the front cross member.

Not welded in yet but Steve Parker brackets with the original 300tdi rubber mounts - R380 gearbox adapted to the series transfer case.

After fiddling around most of the day trying to level up a 300tdi in a swb series 3 would a good guide be about level with the crankshaft pulley/front cross member. One of the images was taken at an angle but barring the odd mm the top of the pulley is level with the front cross member. The...

Thank you for the Wolf link and thanks for the tip about buying trailer tyres (that's the sort of info I was after).. Looks like I'll be calling 4x4tyres next week -

Might be worth a telephone call to John Richards to see if they have a set otherwise I'll keep searching.

I am still working on re-building my series 3 1971 swb and was casually looking for a set of wheels and tyres. I came across this offer from John Richards https://www.johnrichardssurplus.co.uk/goodyear-g90-750-x-16-tyre-on-land-rover-defender-wolf-rim-collection-only.html Are their any forum...

It's got me flummoxed as well - hoping a forum member knows the answer -