Thanks retro, think my six bolt is goosed ! Column uj's are good and new steering pump hasn't cured my lack of power steering. No fluid leaks but the only old part in the system is the box. It just stopped working? Drove fine and next turn of the key nothing. :( Are the four bolt boxes better ??

quick question? 1991 defender 110 Is there any reason I can't swap my six bolt steering box for 4 bolt ? I'm hoping they're a straight changeover ? Cheers guys

Hi from Staffordshire :D welcome aboard

Hi Ian, I'm fairly new here myself, have a good poke round, lots of good info. Chris

I'd buy one :)

Hahaaaa, just like me Grem. I'll be there, looking for storage boxes, diff guards, tat and generally stuff I don't need :). Hope to be camping from the Wednesday night onwards as helping a mate with stand setup.

Looks like a good time had by all ! Sad I sold my series 2a now but can't keep em all, great photos by the way.

Hi, photos please Oh and welcome

Welcome guiri Lovely looking old Landy. Did you rebuild it yourself?

Know whereabouts you mean, I had quite a job finding anyone that would take on a whole Land Rover 110 in bits ! Most folk only do smart repairs nowadays or flashovers, I needed a complete colour change. Went with a chap in Dilhorne in the end, glad I did

Eyup greyhair at owrayt ! I got a good local chap to paint it for me. Crackin deal too as I wasn't fussed about how long he took. I knew I'd be a while on this build so as long as he did the parts I needed next I could keep working. I did spray almost everything else though, axles, brackets...

That's pretty much the same as I did Flossie, poked a long piece of wire in exactly the same sawing fashion until I had success, then taped the loom to it I'd bought complete new wiring from Autosparks which was different to my old main loom and caused a lot of headaches to be honest. The new...

After the bulkhead returned the more rewarding part began, I tried to refurbish as much as possible but if any parts were beyond their best I had to replace. The original side frames were in a terrible state so I had managed to source some from a later Td5 vehicle, stored them away until this...

Mine was same Flossie, also the panhard rod bracket has two long bolts through chassis, these were different to my original ones, shorter, I think. Hard to come by so I sent a die down them then trimmed length, also, the holes in chassis for every plastic pipe clip were larger. And needed later...

Hi Retro' I didn't pack my hinge holes and they filled with galv, which is why they were a pain. Don't know what would work to be honest but after the fact I thought it would have to be something that could withstand the acid dip and then heat of the galving tank. Thoughts anyone? The rivnuts...