Yes, Autoglass said thats the worst screen they've ever seen/replaced! I had to the jig the frame back straight for them to replace it! Had it valeted after to sort that ;), very fine bits of glass went everywhere!!

A while back I got my P38 stuck on its belly. Firstly attached a normal rope to the towing eye - it snapped the rope. We then tried a kinetic rope, which did not budge the P38. Second try with the kinetic rope, and full bore from the trooper trying to recover me, broke the towing eye on the...

Yes you should be able to do the same test with the multimeter with them in situe, just a bit tight getting to them!

2 ways to do it with them removed. One is with a battery n jump leads, connect negative to the large thread, and positive to small threaded part, and the end will glow red/white hot if they are working. Another is to put a multimeter on it, on the setting that beeps when there is a circuit...

I think mine is all sorted now. I took the new glow plugs out and put the old ones back in and bam! fires straight away and same this morning! Tested the new glow plugs, and only 2 out of the 6 were working. These were cheap chineese ones from Island-4x4.com. The originals were NGK. So its...

Cheers for that. But no joy, it was already down, and still wont start! Could a faulty crank sensor stop it from starting? I did unplug it the other day changing the starter motor, but fired up fine afterwards, then did not fire at all the next morning. Is there anyway of testing the crank...

I have the same problem on my 2.5 DT, 1996. Will not start now, just cranking over. Smoke/diesel smell coming from exhaust when cranking so must be getting fuel? Where and what is this reset button you mention? Would this be on a 96 model? Cheers

How good is your rear bumper, and what colour are the inserts? Cheers

I have exactly the same problem on mine, this happened about 8 or 9 months ago. It was like it for a few days in the rain, and didnt leak into the cab, just went down the gutters. I took the plastic covers off each side, and managed to lever something toward the front of the Rangey, pushing the...

On this subject, is it possible to fit the HK system (changer/sub etc) to a base DT? Are the connectors already on the loom or would it need the wiring through the full length? I do have a LR head unit that came with the RR but I replaced it with a Sony unit with Bluetooth handsfree.

Took my P38 Diesel wading in Salisbury Plains t'other week n the blades all snapped of the viscous fan and pierced the rad! Bugger! New rad and blades off a duff unit onto the good viscous unit, nd i'll have another go up the plains on the weekend!!

Ditto! You'd be better off getting a Suzuki Samurai or a Jimny (sorry for the swearing!) if you wanna start off with a 4x4. At 17 I paid near a grand on insurance for a Samurai. I've had the P38 DT since 21, (23 now), and the last insurance was around £750 including breakdown and any...

Hi All, I was out in Salisbury Plains on the weekend and noticed the Rangey temp was in the red. Looked under the bonnet and all the fins on the viscous fan had snapped off, also piercing the rad in several places! Rad weld was no good so it was recovered home. I recall reading on here...

Yes, you can feed the belt through without removing the fan. I did move the power steering reservoir out the way, giving more clearance for the lever bar on the tensioner I'm not sure about tensioner replacement intervals, but I have no record of mine ever being changed and it's just about to...

3.2mm inside diameter.