-
In management speak, the number of accidents due to human error, distracted drivers etc has decreased -
Thank you
-
Increasing numbers of accidents being reported here in France due to the brakes being applied without driver intervention, sometime at high speed on the auto route leading to some bad accidents. I gues,s given the overall unreliability of...
-
Rubberknees reacted to Datatek's post in the thread P38 Diesel Injector Pump & Cam Top Dead Centre? with
Like.
It's within spec I think 750/850rpm? You can lower it with Nanocom. I run mine at 800rpm to avoid the low rev vibration. There is a string of parameters that show on Faultmate, I think the same on Nanocom, the first box is likely to be showing... -
Rubberknees replied to the thread P38A in tank pump relay?.Wammers post in tech archive is the one for fuel pump measurement and states relay 12. IF thats of any help
-
Rubberknees reacted to cornishboater's post in the thread P38A Eas unlock wont initialize with Like.
There ya go :)
-
Got a new cable , didn't even need to install new drivers. Worked a charm
-
A sad reflection of the brand, but probably true of any RR made after the Classic era. Any vehicle can suffer an unexpected breakdown & for that eventuality I have breakdown/recovery cover, but the thought of starting a journey lacking...
-
Aren’t RR engines disposable items?
-
Rubberknees reacted to brianp38dse's post in the thread perfectly working EAS to not rising off bump stops at next start with Like.
If this had happened a week ago I could have got a rebuild kit stuck it in my bag and popped it in the post as I arrived in Rome this afternoon .
-
Rubberknees reacted to svenology's post in the thread perfectly working EAS to not rising off bump stops at next start with Like.
This is a great guide. Amazing works by Wammers. May he rest in peace.... he knew his stuff! Seems like my compressor opted to just completely fail from one moment to the next. Was working perfectly fine only hours prior... but with the tests...
-
Rubberknees reacted to doriz's post in the thread perfectly working EAS to not rising off bump stops at next start with Like.
Think I’ve got a couple of Dunlop bags in the spares bin.
-
Rubberknees reacted to Mark Piercy's post in the thread perfectly working EAS to not rising off bump stops at next start with Like.
Welcome to your new adventure 👍 There is a lot to learn about these 38"s. You've got this and we are here to help 👍
-
Rubberknees reacted to Henry_b's post in the thread What did you do with your Range Rover today with Like.
New wheelz for the old girl. Hurricanes to replace the comets.
-
Rubberknees reacted to backinblack's post in the thread What did you do with your Range Rover today with Like.
That's what my local indi just said :)
-
Rubberknees reacted to Flossie's post in the thread P38 Diesel Injector Pump & Cam Top Dead Centre? with Like.
Connections aren't used at the bottom for a diesel. When mine goes I'm going to fit one of them there all alloy ones, direnza iirc?
-
As pilots say, any landing you can walk away from is a good landing.
-
It's a Range Rover If you got there and back without a ride on the back of a recovery truck IMO you have got a good one.
-
Rubberknees reacted to Datatek's post in the thread What did you do with your Range Rover today with Like.
Out of the frying pan and into the fire. :banana:
-
Rubberknees reacted to marjon's post in the thread What did you do with your Range Rover today with Like.
Sometimes we have to move on :). Enjoy the new ride:D. J
-
Rubberknees reacted to backinblack's post in the thread What did you do with your Range Rover today with Like.
I know, I'm gutted :). I will miss the old girl though :( She'll be going in the for sale section if anyone is interested. Needs welding in the usual places, rear arches, rear quarter, or a spare parts car :eek:.
-
Rubberknees reacted to Datatek's post in the thread P38 Diesel Injector Pump & Cam Top Dead Centre? with Like.
Personally, I would replace the RAD, they are prone to cracking as they age, not worth risking a cracked head for the price of a RAD IMO.
-
Rubberknees reacted to Datatek's post in the thread P38 Diesel Injector Pump & Cam Top Dead Centre? with Like.
I second that.
-
Rubberknees reacted to Datatek's post in the thread P38 Diesel Injector Pump & Cam Top Dead Centre? with Wow.
You can show what ever you like young man.
-
Rubberknees reacted to Mark Piercy's post in the thread P38 Diesel Injector Pump & Cam Top Dead Centre? with Like.
Don't take the risk with any cracks on the rad, especially if it's under pressure... Ask me how I know😞
-
Rubberknees reacted to UnitLandy's post in the thread P38 Diesel Injector Pump & Cam Top Dead Centre? with Like.
Datatek, I was going to do a video on timing the FIP. Is it okay for me to show your method of timing if I credit you?
-
18mpg, kin'ell don't think i've ever had mine that high..... :D
-
So it will not support the Prolific USB to serial adaptor.
-
it's an old car , the old software an laptops just seem to work better. I presume that laptop would have a dedicated coms port ?
-
I have an old panasonic toughbook with win 7 just for the P38.. Check the block connectors behind the plastic trim in the passenger footwell.