Acetone is cheap over here, available in 1 litre bottles in supermarkets.

Ye he needs his toes done Roja red And his windscreen cleaned

When you've done your nails, pop round & help Roy !!

But dashboards aren't 😱

I bought a bottle of nail varnish remover from home bargains.. pure acetone and very cheap

There's a lot of loose chippings round here at the moment, usually from stones getting flung up from pot holes. The bus-grade cleaner has a mix of alcohol and other stuff, but I'll give white vinegar a try. I've got some acetone, used for making...

:cool: Done, not 100% happy considering how much effort I put in but looks lush ...if you don't stare at it too long..🤪:vb-lol:

My LHD project car passed the MOT today, no advisories as such, just a comment about the front left tyre which looks OK to me. :banana:

Beat the sheep out of it☝️😎

Check if the existing O2 sensors are working first. Although it usually recommended not to clean them, I've had good results in the past using carb cleaner on O2 sensors. Make sure the connectors are properly clean, as their position either...

Also just ordered some more maf cleaner give that a clean aswell just had a look on rimmers site for original oxy sensors 2nd mortgage

Yer got nanocom but also had battery off it so maybe just need to reset trims will finish work in morning and go for nice drive and also try and record live data on nanocom

Well done on mot grrrrr mine failed today bloody emissions

pwood999 - thank you very much! That worked out great - the windows are closed and I now have peace of mind and can prepare everything else in peace. This was my setup: I quickly built 2 plugs

If all else fails you could have the 'screen removed, so that any weapons-grade cleaning procedure(s) won't damage the car's interior & if that fails have the 'screen replaced.

I'll try to get some when I am back where I can get a signal. Somehow 'civilisation' has a worse phone signal that the back of beyond 🤷‍♀️

Hmmm, humidity and l322... Don't use steam please🙏 It sounds like back in black dashboard spray doesn't it🤔 It is a mare to shift for sure.. I'd go with some of the above ideas before letting the car even see the steam😜

I asked the same question when I was recommissioning my 38 around 3 yrs ago. The only plausible explanation is to help against vibration fractures but ...not convinced. I made exact copies anyway just in case.

Acetone will shift most things but be careful not to get on plastic as it may destroy it.

Glass fitters will use a mix of both alcohol and vinegar, along with 'anionic surfactants' A good plan would be to buy a decent glass cleaner that's already got vinegar and add some alcohol

I honestly thought it was code for bird all this time

Plus 1 on the vinegar and paper towels

Tried alcohol (ipa)? Tried white vinegar?

MoT passed although a couple of advisories. Track rod is apparently a tad loose. It isn't that old and it was Lemforder. Disappointing.

There is one of those newish MG SUV type things around here and the owner has bought all the individual letters to spell out M O R R I S G A R A G E S across the bonnet. That's a lot of letters, goes almost edge to edge across it.

New bushes me thinks!!! ;)

And we still keep coming back:stars:

Brilliant answer ☝️😎👍

That we’ve been here too long 😱