Just shout if unsure mate. No pro but I’ve gutted one before and got mine in bits now. I’ll update the thread with the bits that need ticking off so it helps others also 👍🏻

Ah perfect, thanks!

This one https://yrmit.co.uk/product/rear-cross-member-floor-support-lr-discovery-1/ @K2tnt You can measure the spot welded brackets from your existing one, chop the lot out, drill the bracket spot welds out then weld them back on to your new...

You need the z piece mate

Oh that’s a winner then!!

Get what you pay for….

Hello all, First time landy owner here so apologies if i ask the obvious questions, so please go easy 🤣! Bought and collected a 1989 Defender 90 with a 200tdi engine at the weekend as a on going project! Already changed the headlight and tinted...

And because dirty grinding and drilling jobs get laborious, I finished a b pillar off. Just needs some sealer at the bottom. Lanoguard grease sandwich between the body, shims and brackets

Trying to remove the z piece at rear half intact just so I have reference for the trim clips. Time to get bracing now.