Everything on this car is held together with cable ties :confused:

ok great - I don't have ac :| and the lower switch (which has 3 connections on it) had 2 wires on it - the upper one appears unconnected.... maybe I'll run the wires to the upper switch instead.

My rad fan doesn't work... I was told by the seller that the switch was on the bottom rad pipe, and that this had 'probably' gone. Sure enough, there is a switch and 2 wires in it (though it's damned tight and I can't undo it due to the flex in the pipes :( But whilst also trying to change the...

ebay :oops: lol I hadn't looked around :confused:

But I suspect your supports behind the sliders are not home-made like mine are :(

Thanks guys, I'll check the fan direction - I did however encounter another issue whilst poking and prodding the pipes... the top pipe (pump to rad), has a bloody pin hole in it... so it was venting bubbles out. So have ordered a new one of those. - I wonder if it was enough to leak air into the...

Thanks guys :) @The Mad Hat Man I have no idea... but if anyone else does?!! Otherwise, new springs & turrets only seem to come in at about £100. :)

ok, so just springs & turrets required - that helps ease the runaway spending :)

I'm not sure I actually understand this. Why would standards be about 10" and my "lifted" kit be 6". Does this suggest I've got standard shocks on it? since they've effectively lowered the mounting point? - and therefore only the springs and turrets have been changed?

Thanks, will check that out too. This car is odd, somethings have been done really well, others have been bodged up... so we'll see about the brake hoses!

nuts! ok thanks :)

6in.

Hi, I'm going to remove the lift kit from our 90. Do I need to just change the springs & shocks? Anything else I need to be aware of? (I think it has dislocation ones on the rears, can they stay? Do I need to swap the turret below to something else? Thanks again!!

I don't believe so - think they just did the pump :| I am assuming this is working ok though as when the fans are switched on, it does cool it all down (apparently).

Doh! tbh though, they're a LR specialist so I think they'd have done it correctly (whichever way that should be)