As I said, add your town name / location to your profile. Might be someone nearby with Nanocom.

Yes locking with FOB does engage superlocking. With the key you need to turn it twice. Might be worth cleaning the volumetric sensors in case there's spiders in there ?? Also check bonnet, tailgate & door switches are all showing closed &...

Generally ignore the diagnostics voltage & measure with the multimeter whether it's battery, fuses, ECU's, etc. If battery & main fuse voltage are still 12V when cranking, then the drop must be somewhere else. What's the voltage on the...

Out of curiousity, I tried disabling the Trip Computer in my GEMS High-Line BECM today. With it set to "Not Fitted" the stalk trip button does nothing. Re-enabled it again & checked it's working. @P38DieselOwner Try fitting the stalk first...

Maybe have a look at this thread & contact @RangeRover3D ?? If you have the part with the wrong hole position, then scan the part & adjust the screw hole position ?

I think you just need to check the label but the fuses. Look for the H or L in lower left corner.

Should be on a label on the BECM ?? Do you have stuff like memory seats or mirrors ? Also as you don't have a location, nobody knows if there's a Nanocom near you !!!

Disconnect battery & check voltage is 12.8V. Then wait overnight & measure again. If it drops to 10V again, then the battery is duff.

Check if you have it in BECM Setting screens.

As promised before and after piccies

Standard procedure . . . dump all the particulates in the counrtryside rather than in the towns !! I asusme overall pollution must be similar to a pre-DPF car !!

My son had similar DPF errors on his previous Jag XF. Most of his journeys at the time were 4-5 miles twice a day to & from work. Regular blasts up the M40 after his girlfriend moved to Buckingham cleared it with no garage visit required.

Either of those sounds more likely. As both the set in the car, and these go through the resistance range smoothly, will try the replacement HEVAC first. If required, I have 5 spare pots ready. Did one in the other car a while back, but had...

Took the right blend apart to check. Def says 10K on the pot & measures 12.3k on terminals !! Bit more than 5%, but hey ho, if the HEVAC uses it as a voltage divider then should be ok. Will see what happens with the "new" HEVAC.

Also did some tests on my spare heater box & motors today. Tested each motor with 9V battery & multimeter on the pots. They do seem to vary a bit, but we have to assume the HEVAC simply tests the voltage across the pot across the range when...

Avoid trying to order from an LR Dealer. Somebody posted a while back that UK dealers will take your money, and then inform the keys are on back order. Instead ask the dealer for the "Lockset Bar Code" based on your documents & VIN. It's a...

Given that the car is parked for static leak tracing, just unplug the relay. Then once that's done put the relay back, and do live leak tracing with engine running. In the latter case you're looking for leaks during normal operation. Better...

It seems I bought one on eBay. Had sent an offer earlier in the week, and it got auto-accepted last night !! But if that doesn't work . . . . . .

Does anyone have a spare working HEVAC going cheap ? Don't mind if it has pixely display, because I have a spare Zebra strip to sort that.

Maybe the accumulator wasn't as "new" as you thought ?

Update on this. Replaced the connector on the heater core sensor, so now that reads correctly (90% of the time, but occaisionally jumps to -20degC !). Re-visited the HEVAC control, and confirmed no voltage out of the L272M driver chip...

Just a Nanocom, spare compressor & small adjustable spanner (for fitting it), plus some oil & water in mine these days. Years ago I always had a toobox in the car, but these days if required will get it recovered home instead.

Nanocom doesn't appear to show the MAF. It does MAP(boost) & Ambient pressure, plus various other stuff, but for MAF you would need to measure the voltage separately.

Surely they both have hairdressers in common ?

If the same issue on rr.net is also you, as well as reading RAVE, watch the video posted there.

Firing the parts cannon is an expensive way of fixing things. Does the brake pump run? It should run every 3 to 5 depressions of the brake pedal. If it doesn't run then check the fuses but it's likely that the pressure switch has failed. The...

Yep , hopefully the op will come back and say thk u and plse As a side note as it’s becoming more prevalent maybe we should stop answering threads that don’t say plse or thk u in the future

Didn't know it was an FL2 when I posted. Will delete my post !!

Nanocom shows the boost pressure (I assume MAP), in the EDC-Inputs-General page: