• pwood999
    pwood999 replied to the thread [P38] Exhaust gases in coolant.
    Plugs should look like the left one. If any are like the right plug, almost certainly head gasket.
    • 1740409028187.png
    Feb 24, 2025
  • pwood999
    pwood999 replied to the thread L322 Seeking help - Gearbox Fault.
    +1 on check charging voltage. The cars are quite fussy about volts !! Also, check your time machine if the battery was changed on 27th Dec 2025 ??
    Feb 24, 2025
  • pwood999
    pwood999 replied to the thread [P38] Exhaust gases in coolant.
    It can also be the front cover gasket weeping into the coolant around the water pump. Definitely worth doing compression test on all 8 cylinders. Take all the spark plugs out first. Also flush & refill the coolant with water, and test again...
    Feb 24, 2025
  • pwood999
    pwood999 replied to the thread P38A Rear hub assembly FTC3223 from Eurospares anyone tried them?.
    We could try doing one old one each ??
    Feb 23, 2025
  • pwood999
    pwood999 replied to the thread P38A Rear hub assembly FTC3223 from Eurospares anyone tried them?.
    How are the Eurospares bearing going after a year ? I'm getting a rumble on mine about 60-65mph, mainly from the seat & floor, but not through the steering wheel. Feels like either rear wheels need balancing, or the bearings on their way out...
    Feb 23, 2025
  • pwood999
    pwood999 replied to the thread Picture in motion.
    What does the owners handbook say ?
    Feb 21, 2025
  • pwood999
    pwood999 replied to the thread Picture in motion.
    Here's the regulation: https://www.legislation.gov.uk/uksi/1986/1078/regulation/109 Her's the solution: https://www.xcarlink.co.uk/land-rover-discovery-4-range-rover-evoque-sport-tv-dvd-video-in-motion.html Website has this disclaimer because...
    • 1740158057002.png
    Feb 21, 2025
  • pwood999
    pwood999 replied to the thread P38A Battery Cable loose in Clamp.
    Click where it says "Option 1" in the post above !!
    • 1740157887561.png
    Feb 21, 2025
  • pwood999
    pwood999 replied to the thread P38A Battery Cable loose in Clamp.
    The only downside is these use 14mm clamp nut, so I now need 13mm for the ground & 14mm for this !! The kit does have another clamp for the ground, so will fit that one day !!
    Feb 21, 2025
  • pwood999
    pwood999 replied to the thread P38A Battery Cable loose in Clamp.
    New positive fitted & working. MOT runs out today, so need to get that done next week.
    • 1740153403491.png
    Feb 21, 2025
  • pwood999
    pwood999 replied to the thread P38A Driver's door lock issues.
    If windows and locking is not working, then it sounds like you have an issue with power or communications to the outstation. Check fuses 9 & 22. Nanocom will show if the outstation is responding. If the latch is stuck in the superlock...
    Feb 21, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    The beeps stop after a while as long as you keep going about 35-40mph.
    Feb 20, 2025
  • pwood999
    pwood999 reacted to Datatek's post in the thread Air to Springs with Like Like.
    It seems the OP is completely unable to comprehend that fact.
    Feb 20, 2025
  • pwood999
    pwood999 reacted to Rubberknees's post in the thread Air to Springs with Like Like.
    I've driven 50 miles from Lincoln on bump stops, no problem
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    I did Basingstoke to Langley on the stops, again no problem albeit a bit uncomfartable. If we try harder we could get this thread up to a few hundred posts !!
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread What did you do with your Range Rover today.
    no snow here . . . just lots of rain.:vb-umbrella:
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread P38A Driver's door lock issues.
    The lock button only moves the small white lever to lock & unlock the latch. The cable for the inside handle and the outside handle both move the unlatching mechanism. Best bet would be to get another latch & understand how it works first...
    • 1740084750809.png
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    It does sound like you bought a duffer, and used a garage that doesn't do the jobs properly. Both mine are rather reliable. The only exceptions are things that fail on all cars at some point.
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread P38A Battery Cable loose in Clamp.
    These arrived today. When it stops raining, will fit them - assuming I don't need to get new cables as well..
    • IMG_2019.JPG
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    You aint been here long. Wait until you see how far off topic we can take it :):cool: oh, and btw, one (i.e. you) is mostly incorrect about lots of things P38.
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    and if your garage had followed the LR manuals, they should have used an exhaust clamp, not a u-bolt !! If positioned properly it cannot impact the diff. Nether of mine are anywhere near the diff
    • 1740075917178.png
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    Hmm.. "There are none so blind as do not want to see'
    Feb 20, 2025
  • pwood999
    pwood999 reacted to Datatek's post in the thread Air to Springs with Like Like.
    You are not listening, the hole was caused by a badly fitted exhaust, no part of the exhaust should be able to come into contact with the back axle or any other part of the running gear even when the car is on the bump stops. It could even have...
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Eas system holds air then drops after driving and turn off.
    X8R for the parts. Replace all the o-rings & diaphragm valve. Do the compressor refurb as well. Before & after that check the airbag for leaks where the airline enters, and around the folds in the bags at all four heights.
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    Sounds like you need a better garage, given they fitted the exhaust badly. If the u-bolt was that close, the chances are Access Mode could also do the same damage with the EAS working. I cannot find a single instance in the 600,000 posts on...
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Eas system holds air then drops after driving and turn off.
    Almost certainly air leaks, and a worn or failing compressor. Could also be leaky diaphragm valve. @dubloman your location is a bit vague !! Plenty of us in the UK, but only those near your town could help !! Put it in your profile
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    I second that about the rain. Lower half has been useful at times, i.e. as a laptop bench when several of us were working on a Virgin/Liberty Global Trials site in the good weather. In the bad weather a one-piece tailgate would have been...
    Feb 20, 2025
  • pwood999
    pwood999 replied to the thread P38A Battery Cable loose in Clamp.
    Yes I thought that as well. Ordered a pair & will see tomorrow. At least I can return them if they don't fit !!
    Feb 19, 2025
  • pwood999
    pwood999 replied to the thread Air to Springs.
    Ha Ha. Never heard of that. Would need to be a sudden failure that dropped the car onto rocks or similar. Even on the bump stops, the exhaust is nowhere near the ground. If the exhaust was badly fitted maybe the axles came into contact ...
    Feb 19, 2025
  • pwood999
    pwood999 replied to the thread P38A Zf4 hp24 input shaft!!.
    Def try Bemble or Ashcroft. They will probably know what needs swapping.
    Feb 19, 2025
Show older items